Exhaust Systems - Pros/Cons
Discussion
Did you guys see the PH story: NEXT-GEN FERRARI RACECAR DEBUTS? At the bottom, next to last line, am I reading that correctly? This F430 doesn't have a carbon exhaust, does it? CF can't take that kind of heat, can it?
The line reads:
Weight reduction measures include the plastic windscreen, the all-carbon fibre intake plenum cover, and exhaust system.
After reading it again, I think the author is saying they have made weight reductions in the exhaust, intake, and windscreen...with no inference that the exhaust is CF.
Weight reduction measures include the plastic windscreen, the all-carbon fibre intake plenum cover, and exhaust system.
After reading it again, I think the author is saying they have made weight reductions in the exhaust, intake, and windscreen...with no inference that the exhaust is CF.
pb3 said:
My stainless system also has individual flanges (3 in total on each header) but I know the factory stopped doing them in favour of a one piece design quite some time ago. I only had issues with fitting the headers from new the first time round, I guess I have been lucky that on the several occassions that I have taken them off they went back on "quite" easily, but in life there is always one...
Yep me to......with mine it's the long pipe that's a bugger to fit. Spoke to a previous builder and was told to be very careful as there's a good chance of screwing the thread up in the head, it's going to take acouple of us to get the headers on!!!!!
If you look on Stig's site you'll see that the headers now have a one piece flange.
Graham
OK... this is not an Ultima, but is some mighty fine work.
and the biggest shock of all ..... the car that this is installed in
www.cardomain.com/ride/2196921
This photo shows a tag on the header saying “CER racing services”, one of the photos shows the car out the front of “gt40 Australia” and these guys are in Queensland.
Web links
www.cesracing.com.au/
www.gt40australia.com/
If you look carefully at some of the other photos in the blog you will notice that the chassis have been modified and therefore these exhausts may not fit if you had a standard Ultima chassis and were using engine adaptor plates to allow the use of standard sbc mounts. Not sure if I’m a fan of these, I think that the ones that are being built by spectrum are a lot neater.
Someone else on the forum has informed me that they were trying to make contact with them and work out what the details were so hopefully the verdict will be in soon on weather or not they can supply.
>> Edited by ezakimak on Wednesday 25th January 04:27
Gassing Station | Ultima | Top of Page | What's New | My Stuff