Crank Case Breather SBC

Crank Case Breather SBC

Author
Discussion

fastco

75 posts

232 months

Tuesday 20th February 2007
quotequote all
DHGTR said:
wow thats some kind of great looking engine in that 3rd picture.!!!

clap


Yes in indeed a real head turner & snapper.. how you come'n along with the beast? Up and run'n yet?....Cheers! Dr,Dee


BogBeast

1,137 posts

264 months

Monday 26th February 2007
quotequote all
fastco said:
Hello..your best PVC system is to use billet alum valve as in some photos and plumb 3/8 ID braided hose to carb base from PCV valve, and on other rocker cover use 1.25 OD K&N useable filter... job done!
I take it that that air is sucked in thru the K&N, around the crankcase and then out through the PCV? (sorry just trying to get it straight in my head...)

steve_d

13,749 posts

259 months

Monday 26th February 2007
quotequote all
BogBeast said:
fastco said:
Hello..your best PVC system is to use billet alum valve as in some photos and plumb 3/8 ID braided hose to carb base from PCV valve, and on other rocker cover use 1.25 OD K&N useable filter... job done!
I take it that that air is sucked in thru the K&N, around the crankcase and then out through the PCV? (sorry just trying to get it straight in my head...)



Yes you read/interpreted that correctly although I don't agree with it.

What you could be doing is drawing air into the system at a time of high manifold vacuum which will enter below the carb and mess with the AFR. If the filter were removed and the vent sealed then the inlet would only be able to draw blow-bye gasses. It would be a roughly balanced system as the max vacuum will be on full power coinciding with the highest blow-by.

Steve

scuff

Original Poster:

160 posts

216 months

Thursday 15th March 2007
quotequote all
Hello all,

I have completed the mod and fitted the engine breather. Nothnig ground breaking as there a quite a few who have fitted similar. Here is the result. Thanks to all who contributed and offered advise.

The final proof will be in the testing. Guess that when the car goes for a tune up at Track and Road (2nd April) will better know the results.

Thanks again.



Edited by scuff on Thursday 15th March 21:39

tuxman

9,010 posts

239 months

Friday 16th March 2007
quotequote all
looks good scuff ,you did not happen to have a bit of -10 hose spare did you ? i need a bit . simon

scuff

Original Poster:

160 posts

216 months

Friday 16th March 2007
quotequote all
Sure I have about 20cm left, you can have it. Either ring me an give me your address and i will post or drop by and I can give you the hose and a beer.

Scuff