ARE WE THERE YET?
Discussion
Thought I would start an 'ARE WE THERE YET?' Register.
We get to know the more prolific contributors here, but it would be good to know precisely who is currently in Build Mode and what their current stage is? ...
...very useful to other builders no doubt, and even more to newbies....
...maybe we could check occasionally to see how the progress goes?
So, since I know all you out there absolutely LOVE LISTS from what I have witnessed...
If you have already registered your car.. then that does'nt count!
...here we go..
'ARE WE THERE YET?' Register
1. V8 VUM - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
Anyone care to add theirs?
Keith
We get to know the more prolific contributors here, but it would be good to know precisely who is currently in Build Mode and what their current stage is? ...
...very useful to other builders no doubt, and even more to newbies....
...maybe we could check occasionally to see how the progress goes?
So, since I know all you out there absolutely LOVE LISTS from what I have witnessed...
If you have already registered your car.. then that does'nt count!
...here we go..
'ARE WE THERE YET?' Register
1. V8 VUM - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
Anyone care to add theirs?
Keith
- GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010..... 1. V8 VUM - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
2. Deadscoob - delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
Edited by pilbeam_mp62 on Tuesday 2nd September 15:40
Oh! - and even more useful is which area you are located for obvious reasons -
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
Any More?
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
Any More?
Oh! - and even more useful is which area you are located for obvious reasons -
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
where are you? I know you should be on this list.....ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
12. Dutchess - Maidstone. Blue GTR. Planning on LS7. Chassis and suspension delivered in 2003
, then a 4 year gap while I worked out how to open the boxes... (well sprogs got in the way). Currently fitting body, dash and switchgear on the rare occasions I have time to work on it. Er, um, ran out of dosh, so will finish it when I can; probably just in time for the London Olympics
. But despite that I'm very happy with the experience!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
12. Dutchess - Maidstone. Blue GTR. Planning on LS7. Chassis and suspension delivered in 2003
, then a 4 year gap while I worked out how to open the boxes... (well sprogs got in the way). Currently fitting body, dash and switchgear on the rare occasions I have time to work on it. Er, um, ran out of dosh, so will finish it when I can; probably just in time for the London Olympics. But despite that I'm very happy with the experience!ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
12. Davrianman - Magor (near Newport, S. Wales) - GTR. Started Sept 2006. Car in paint shop - Colour TVR Spectraflair Silver. Engine 434ci (7.1L) Dart with Kinsler Stack Injection System, drysump, brodix heads (600+bhp, 600+lb.ft). Just engine install and electrics to complete. Digital Dash, TVR switches, onboard PC / touchscreen, Motec ECU, Traction Control, G50/03 with tripple plate organic clutch. Planned finish date April 2009.
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
12. Davrianman - Magor (near Newport, S. Wales) - GTR. Started Sept 2006. Car in paint shop - Colour TVR Spectraflair Silver. Engine 434ci (7.1L) Dart with Kinsler Stack Injection System, drysump, brodix heads (600+bhp, 600+lb.ft). Just engine install and electrics to complete. Digital Dash, TVR switches, onboard PC / touchscreen, Motec ECU, Traction Control, G50/03 with tripple plate organic clutch. Planned finish date April 2009.
ARE WE THERE YET!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
12. Davrianman - Magor (near Newport, S. Wales) - GTR. Started Sept 2006. Car in paint shop - Colour TVR Spectraflair Silver. Engine 434ci (7.1L) Dart with Kinsler Stack Injection System, drysump, brodix heads (600+bhp, 600+lb.ft). Just engine install and electrics to complete. Digital Dash, TVR switches, onboard PC / touchscreen, Motec ECU, Traction Control, G50/03 with tripple plate organic clutch. Planned finish date April 2009.
13. 738 driver ..Lancashire - GTR, collected Kit last week....just finishing off the new garage/workshop before the first rivet is popped.
SBC/G50. Love the car but engines/engineering are really my thing... was on with a 414 but further to advice on here, now its a revvy 377. Dart block/custom ground cam/AFR 227's/jesels/lightweight forged etc/etc/etc.
Just like all other builders it will be a labour of love (and hate some days) so no planned completion date!
1. V8 VUM - Cheltenham area - Started Jan 2006 - GTR/LS7/Getrag GT2 6 speed box - getting close to paint job and engine fit.
2. Deadscoob - Midlands area -delivered Jan 2007, started Feb 2008 - GTR, built with LS7 in mind, 360mm AP 6 pots, Prosport uprights. Should be ready early 2010.....(not an old duffer, so it will be the right colour too)
3. Pilbeam_mp62 - Near Lymington, Hants. - Started December 2007 - GTR, building with LS7 in mind - at rolling chassis stage - Yellow bodywork being pre-fitted at factory end-Sept... hoping to finish build August 2009
4. wb200 & DiscUltima - Singapore - Started Dec 2007 - GTR/LS7/G50-03 - close to finish, another 2 or 3 weeks to go all fingers & toes crossed.
5. Scotty-Boy - Edinburgh - 1999 Spyder (Unfinished Kit Bought By Myself in May 2007) - Audi RS4 V8 (2007 Model) and Audi 6-Speed Box - AP's & Intrax - Meantime Carrying out Chassis / Bodywork Mods - Hope to Be Ready For Spring 2009
6. Donkeasy - Eindhoven holland - started juni 2006 Grey/black ATS/central lock/audilambv10/intrax/ricaroseqbox/APbrakes/APjacks/ATLtanks/recaro's/GTR/
hope to be ready in aug 2009 for meeting at Ultima.....happy builder....Iam
7. Clynos1 - Near Salisbury, Wiltshire. Started 28th April 2008 - Yellow Can Am, Doing it on the 'cheap' second hand body, ex GTR-Gaz engine, everything else brand new. 996-C2 Gearbox with limited Slip Diff, currently on it's way back from GBOX in the States. Hope to have the car finished just after Christmas 2008-9.
8. rduart - USA, California, Granite Bay near Sacramento. Started November 2007, GTR / Jeff Schwartz provided LS7 / G96-88 transaxle. Blue bodywork, currently plumbing engine bay and refining electrical to use Porsche controls, MXL Pista for the display. Shooting for completion by the end of the year 2008.
9. Spid- Horsham Sussex. Can Am Chassis arrives on 30th September LS7 Engine. 996 GT2/Turbo box when I find one. Would like to build it in a year ish.
10. Qute134 - Cardiff. GTR. Chassis and first 8 stages arrived end of May. Not a great deal completed so far, alloy panels in place. Plan is to fit all new factory spec. Building with LS7 in mind & Porsche G50 gearbox. Hope to put in a lot of build hours over the winter months. Completion early 2010.
11. RussF - Cheshire - Red GTR/LS7/G50-03 - Started Feb 06 - Target for completion Summer 09 - @ Rolling chassis stage with body pre-fit complete and lights fitted.
12. Davrianman - Magor (near Newport, S. Wales) - GTR. Started Sept 2006. Car in paint shop - Colour TVR Spectraflair Silver. Engine 434ci (7.1L) Dart with Kinsler Stack Injection System, drysump, brodix heads (600+bhp, 600+lb.ft). Just engine install and electrics to complete. Digital Dash, TVR switches, onboard PC / touchscreen, Motec ECU, Traction Control, G50/03 with tripple plate organic clutch. Planned finish date April 2009.
13. 738 driver ..Lancashire - GTR, collected Kit last week....just finishing off the new garage/workshop before the first rivet is popped.
SBC/G50. Love the car but engines/engineering are really my thing... was on with a 414 but further to advice on here, now its a revvy 377. Dart block/custom ground cam/AFR 227's/jesels/lightweight forged etc/etc/etc.
Just like all other builders it will be a labour of love (and hate some days) so no planned completion date!
Gassing Station | Ultima | Top of Page | What's New | My Stuff