TVRCC Herts & Beds: Monthly meet reminder 18th Jan 2015

[alex_gray255]

Hi folks

Just a quick reminder that the 1st monthly meet of the
year (2015!) will be on the 18th of Jan starting at 1130.

The address for the venue is...

Shuttleworth (Old Warden),
Aerodrome
North Biggleswade,
Bedford SG18 9EP
01767 627927
http://www.shuttleworth.org/

Google Maps link - Link to the route from Tudor Oaks to
our new venue - http://goo.gl/maps/Tzhtr

Parking on the day is signed up especially for us - we
are opposite hanger 6, so just follow the TVRCC parking
signs.

Thanks!

Alex

PS - Sorry, not able to make this month as (still) working in Sweden

[SHiggs121]

hmmm...not so sure about it this month.

[alex_gray255]

Yup, if the weather is utter rubbish on the day, best not to go. Don't want any accidents!

[jr6yam]

Weather was ok actually, dry and bright but a bit 'fresh'
Smallest turnout I've seen for a while; A Sag, Chim and a Griff (and some old Datsun )
Had a good chinwag tho' and a masterclass in plastidipping. Quite fancy the Zed in matt Blue now...

[alex_gray255]

Jan and Feb are always small months - either buried under snow, washed out or very cold.

If I remember last Feb meet (2014) the weather was very sunny and had a lot of cars come
which was unusual for that time of year.

[J12KJR]

Something wrong with you Herts and Beds boys Cambridge had 8 Tivs there when I went over on Sunday plus a couple of interlopers.
Several roof off champions as well but they did look cold.

Be interesting to see the end result of the plastic dipping in the flesh, pictures I've seen to date look quite impressive.
Does it have to be a matt finish or can it be glossy?

[jr6yam]

J12KJR said:

Be interesting to see the end result of the plastic dipping in the flesh, pictures I've seen to date look quite impressive.
Does it have to be a matt finish or can it be glossy?

Hi Kev, T4NGO is the guy to speak to about dipping. I've seen his Sag in 3 different colours so far!
My favourite was the White, which was a more of a satin finish than matt (It's probably a different colour today!)
You could have a gloss finish if you lacquer it, but then you can't peel it off; kinda defeats the object

[Hoover.]

jr6yam said:

Weather was ok actually, dry and bright but a bit 'fresh'
Smallest turnout I've seen for a while; A Sag, Chim and a Griff (and some old Datsun )
Had a good chinwag tho' and a masterclass in plastidipping. Quite fancy the Zed in matt Blue now...

and another Griff.... must change my aftershave for next month, as you all promptly left when I arrived

[J12KJR]

jr6yam said:

J12KJR said:

Be interesting to see the end result of the plastic dipping in the flesh, pictures I've seen to date look quite impressive.
Does it have to be a matt finish or can it be glossy?

Hi Kev, T4NGO is the guy to speak to about dipping. I've seen his Sag in 3 different colours so far!
My favourite was the White, which was a more of a satin finish than matt (It's probably a different colour today!)
You could have a gloss finish if you lacquer it, but then you can't peel it off; kinda defeats the object

Cheers John trouble is I am an old fashioned boy and I like shiny and sparkly.

[AceOfHearts]

Shaun should be coming to map my car tomorrow so should be able to make it next month