Our build thread, renovation and extension
Discussion
paulrockliffe said:
That's a lot of effort for your storage! It's too late now, but did you consider using an external staircase to a dormer entrance in the roof? It would have made a nice feature on the side and saved you all this trouble. Also, a big top-hinge velux so you can sit up there and watch the bowls?
Considered an external staircase but didn't really have the space for it, also considered a top hinge velux but I have an even better vantage point for the bowls form 3 windows in the house.The alarm is already covered but omitted from the list, power for a lift is also on there. I already have 4 external sockets on the house plus external lighting circuits running into the garden. I don't really see the need to turn everything off any more so than in the house. That reminds me, hard wired fire alarm is going in too.
Edited by Muncher on Sunday 15th January 21:24
Well, in the absence of any daylight, looks like you've got enough LED panels to be going on with - Christ! I'm only having FOUR in my single garage ... ! Maybe I'll have to up it a bit.
Interested to hear more about the wall mounted ones and how you get on with them ... I think you' e got more electrickerry in that garage than I have in my whole house!
http://www.seratechnologies.com/news/how-many-led-...
Interested to hear more about the wall mounted ones and how you get on with them ... I think you' e got more electrickerry in that garage than I have in my whole house!
http://www.seratechnologies.com/news/how-many-led-...
Edited by uk66fastback on Monday 16th January 18:54
http://www.charlstonlights.com/led-light-requireme...
High intensity workshop lighting = 82500 lumen for my garage size. 18 ceiling panels is about 75000.
High intensity workshop lighting = 82500 lumen for my garage size. 18 ceiling panels is about 75000.
I had seen that as well but couldn't find 'garage' so like you chose 'showroom' and mine comes out as 14k, but for the full on effect it's 32k ... which is 10 panels! SO I might make it SIX,on mine, not FOUR. How long before they're in at yours?
My son does work at an electrical trade place (cef.co.uk) so I'm quids in as he gets me these at cost!
My son does work at an electrical trade place (cef.co.uk) so I'm quids in as he gets me these at cost!
Tuna said:
82,000 lumen? That's hells bright. My shed has 6 HF flourescent tubes to give 20,000 lumen which is a good clear light for working in (plus spots for detail). You might need to invest in some suntan lotion.
Plus approx another 20000 on the walls. I am sceptical whether the lights will actually hit their stated figure and I'd rather have it too bright and turn a few off than be scratching around in an engine bay holding a torch.Muncher said:
There's garages and then there's garages.... the brighter the better for my purposes.
Mine were about £16 each including drivers. I think it will be about 6 weeks before they are in.
That's a very good price - got a link to them for the spec? Are they going in a drop ceiling or are you having the frames as well?Mine were about £16 each including drivers. I think it will be about 6 weeks before they are in.
The price has gone up a little since I ordered.
http://www.ebay.co.uk/itm/322336777503
I haven't tested those ones but I bought a similar one from another supplier and was pretty impressed with it. I am just going to stick them directly to the ceiling with a little silicone.
http://www.ebay.co.uk/itm/322336777503
I haven't tested those ones but I bought a similar one from another supplier and was pretty impressed with it. I am just going to stick them directly to the ceiling with a little silicone.
Muncher said:
Ok, would you render or plaster the inside of the garage? Same cost for each.
Plasterer says he would render as he can get a good finish and it will be more hard wearing. Plaster is more easily repairable if I need to drill in to it, chase anything out etc. What do you think?
Plaster every time, render inside just doesn't feel right in my head!Plasterer says he would render as he can get a good finish and it will be more hard wearing. Plaster is more easily repairable if I need to drill in to it, chase anything out etc. What do you think?
Muncher said:
Ok, would you render or plaster the inside of the garage? Same cost for each.
Plasterer says he would render as he can get a good finish and it will be more hard wearing. Plaster is more easily repairable if I need to drill in to it, chase anything out etc. What do you think?
Unless it's fully heated and bone dry, I'd always feel that plaster ends up 'soft' and just doesn't wear well. More superstition than fact, I'm sure, but still.Plasterer says he would render as he can get a good finish and it will be more hard wearing. Plaster is more easily repairable if I need to drill in to it, chase anything out etc. What do you think?
If I was starting a brand new garage like this - I wouldn't render or plaster.
I'd go for shop fitting type slatwall. You can get it in a number of different finishes, and then you can hang stuff on the walls anywhere.
Like this:
Fixes up on battens, no wet plaster to dry out for days- and probably not much more expensive - you can fit it yourself.
Cheers
Ian
I'd go for shop fitting type slatwall. You can get it in a number of different finishes, and then you can hang stuff on the walls anywhere.
Like this:
Fixes up on battens, no wet plaster to dry out for days- and probably not much more expensive - you can fit it yourself.
Cheers
Ian
felixgogo said:
If I was starting a brand new garage like this - I wouldn't render or plaster.
I'd go for shop fitting type slatwall. You can get it in a number of different finishes, and then you can hang stuff on the walls anywhere.
Good call. Any 'non stone' wall covering will also improve the building's response rate for being heated. which is handy if you're not planning to heat it 24/7. As our builders would say, it 'strikes warm'.I'd go for shop fitting type slatwall. You can get it in a number of different finishes, and then you can hang stuff on the walls anywhere.
felixgogo said:
If I was starting a brand new garage like this - I wouldn't render or plaster.
I'd go for shop fitting type slatwall. You can get it in a number of different finishes, and then you can hang stuff on the walls anywhere.
Like this:
Fixes up on battens, no wet plaster to dry out for days- and probably not much more expensive - you can fit it yourself.
Cheers
Ian
That's a very good idea! I'd go for shop fitting type slatwall. You can get it in a number of different finishes, and then you can hang stuff on the walls anywhere.
Like this:
Fixes up on battens, no wet plaster to dry out for days- and probably not much more expensive - you can fit it yourself.
Cheers
Ian
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff