Garage flooring

Author
Discussion

8Ace

2,682 posts

198 months

Wednesday 11th March 2015
quotequote all
bertie said:
How about replacing the manhole covers with recessed ones and tiling into them.
Bit more work but it's the "proper" way, still access the manholes.
Thanks. Looked into this and it might be a better idea thumbup

Smiler1

179 posts

196 months

Sunday 15th March 2015
quotequote all
Well I started here

Extended it out a bit

Some plasterboard and paint


Then went for the Swiss Trax floor tile




Still needs a tidy up but it has turned a dark cold dumping ground in to a proper workshop


Eleven

26,273 posts

222 months

Wednesday 13th May 2015
quotequote all

Quick questions on Ecotile for anyone who has them - is the disc version significantly better than the smooth grip-wise? Also, is the 500/5 man enough for a domestic garage or is the extra expense of 500/7 worthwhile?

outnumbered

4,084 posts

234 months

Thursday 14th May 2015
quotequote all
When I spoke to them, they didn't recommend 500/5 for garage use (contrary to what it says on the website). I've got the textured finish on 500/7 currently, but don't like it as much as the disc finish we had in the old house. As I mentioned previously in this thread, it's worth calling them rather than ordering from the website as they will negotiate on price.

Eleven

26,273 posts

222 months

Thursday 14th May 2015
quotequote all
outnumbered said:
When I spoke to them, they didn't recommend 500/5 for garage use (contrary to what it says on the website). I've got the textured finish on 500/7 currently, but don't like it as much as the disc finish we had in the old house. As I mentioned previously in this thread, it's worth calling them rather than ordering from the website as they will negotiate on price.
I will, your earlier post was very helpful and informative thank you.

Eleven

26,273 posts

222 months

Sunday 17th May 2015
quotequote all

Slight snag - I had planned to do the floor red, with light grey and black chequered "rectangles" under where each car stands. However, having measured it out tonight it won't work with full tiles. I.e if I set out the centre bay correctly, the left and right bays will be out if I use full 500mm tiles between the rectangles.

The only ways I can see of doing it are to consider each bay independently, cut the tiles and butt them. This sort of defeats the point of an interlocking system. Or, I forget about the rectangles and do the whole floor in black and grey with a red border all the way round.

Or I just do the whole bloody lot one / two colours.

Has anyone worked through this one before?

minivanman

262 posts

190 months

Sunday 17th May 2015
quotequote all
I'd go all one colour for ease. I find the ones with fancy patterns look a bit fussy for my liking. Its only a floor!

MrChips

3,264 posts

210 months

Sunday 17th May 2015
quotequote all
Smiler1 said:
Then went for the Swiss Trax floor tile
Out of interest, what are you using as an underlay here? When I laid my Ecotiles I laid straight onto bare concrete, but i'll soon be picking them all up and moving to a new house so would be good to know if there's anything useful to add some extra insulation?

Eleven

26,273 posts

222 months

Monday 18th May 2015
quotequote all
minivanman said:
I'd go all one colour for ease. I find the ones with fancy patterns look a bit fussy for my liking. Its only a floor!
I won't invite you round my garage then.

But seriously, it's not just about being pretty. Our garage floor gets quite messy due to our rural location and a pattern will hide it a bit.

chris123321

514 posts

190 months

Monday 18th May 2015
quotequote all
Hi, just got a house with a single garage, my landy would never fit in there so it doubles more as a workshop. It has a dirt and stoney floor, whats the best method of getting something solid down. Is it worth building a wooden frame and overlaying with something or going for the full on concrete pour?

Ray Singh

Original Poster:

3,048 posts

230 months

Monday 18th May 2015
quotequote all
Probably going to get flamed for this, but the quickest way is to sweep it and then paint it with a two pack epoxy paint. A coat of undercoat, two of top coat and jobs done.

Go back a few pages and i did a write up on my experience.

The rest of the gang will say plastic tiles, but I found painting cheaper (only slightly though).


chris123321

514 posts

190 months

Monday 18th May 2015
quotequote all
Ah should've clarified, by dirt and stoney I mean the floor is mud and rocks, nicely compacted but not level and certainly not for a spot of painting wink

cheers anyway

SPORTSTER

160 posts

169 months

Monday 18th May 2015
quotequote all
Does anyone know where I can purchase the coin top garage flooring roll but to be made to a custom size (8ft W x 16ft L). Id prefer a one piece roll rather than have to join 2 piece together.

Has any one ordered a made to measure piece before?

Ronji

1 posts

107 months

Tuesday 19th May 2015
quotequote all
I don’t have any experience in purchasing such rolls. But if I have any requirements then I used to assign such flooring tasks to the flooring contractors from Mississauga. They do provide the( http://www.epoxytoronto.com/products-services/epox... ) epoxy resin flooring services </a>as well. I recommend the same for you as well

barchetta_boy

2,195 posts

232 months

Sunday 14th June 2015
quotequote all
Fantastic thread guys, I'm currently at this stage



and leaning towards plastic floor tiles over epoxy for quietness and warmth. When you're working on a 1979 Porsche 928 you need all the help you can get!

jagracer

8,248 posts

236 months

Sunday 14th June 2015
quotequote all
barchetta_boy said:
Fantastic thread guys, I'm currently at this stage



and leaning towards plastic floor tiles over epoxy for quietness and warmth. When you're working on a 1979 Porsche 928 you need all the help you can get!
Sorry but that garage wont be big enough for you................looks fantastic though bow

barchetta_boy

2,195 posts

232 months

Sunday 14th June 2015
quotequote all
I extended their "standard dimensions" half 0.5m each way, so it's 6m wide and 5.5m deep. The house is listed so full planning permission was required. I did all the work on the application myself and still can't quite believe we got it!

There's not really any room for anything bigger but I will be very happy to just have this!

Andehh

7,110 posts

206 months

Sunday 12th July 2015
quotequote all
Looking into my garage now! Gotta be sweep clean easy and able to handle a good pressure washer now and then. Only used for storing 2 cars and my DIY kit so nothing too fancy.

More then likely going to paint it for £100, and regal paints look to do a one cost, 20litres for £60 which gives some patching up spare.

Interested on how others with the paint have been getting on!

bogie

16,382 posts

272 months

Monday 13th July 2015
quotequote all
Andehh said:
Looking into my garage now! Gotta be sweep clean easy and able to handle a good pressure washer now and then. Only used for storing 2 cars and my DIY kit so nothing too fancy.

More then likely going to paint it for £100, and regal paints look to do a one cost, 20litres for £60 which gives some patching up spare.

Interested on how others with the paint have been getting on!
I have the expoxy resin paint on my other garage/workshop floor. Probably did 2 x 2.5L tins for a 16 x 12ft area 2 coats. Looks great so far a few months on, easy to clean. this is more general use than a car going in/out every day though. Its obviously cold underfoot if you are working in there, compared with plastic tiles which add some insulation on the concrete

V8RX7

26,856 posts

263 months

Monday 13th July 2015
quotequote all
chris123321 said:
Ah should've clarified, by dirt and stoney I mean the floor is mud and rocks, nicely compacted but not level and certainly not for a spot of painting wink

cheers anyway
Concrete - there is a reason that 99.9% of garages have it as the floor.