Posh Shed / Garden Room DIY Build
Discussion
Du1point8 said:
Craikeybaby said:
TA14 said:
Du1point8 said:
All build updates are here:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
quite interesting to have a look every month or so as I usually miss the updates unless Im bookmarked.
Not for this project though http://www.pistonheads.com/gassing/topic.asp?h=0&a...
quite interesting to have a look every month or so as I usually miss the updates unless Im bookmarked.
did you ever finish this OP?
I just completed my blog on a similar effort, and I'd be interested to hear how you got on.
I hope you don't mind but I used your picture of the genie lift - something I wish I had hired myself!
Here is the blog if you are interested:
http://buildyourowngardenroom.blogspot.co.uk/
I just completed my blog on a similar effort, and I'd be interested to hear how you got on.
I hope you don't mind but I used your picture of the genie lift - something I wish I had hired myself!
Here is the blog if you are interested:
http://buildyourowngardenroom.blogspot.co.uk/
Need to update this thread, anyway......
Yes the box sections were galvanised - I cut up some 2.4m long fence posts.
Some of the offcuts are still kicking around the garden with very signs of rust even on the cut edges
Yes the box sections were galvanised - I cut up some 2.4m long fence posts.
Some of the offcuts are still kicking around the garden with very signs of rust even on the cut edges
ludsonline said:
Hi Russ,
Are you using galvanised box sections for your supports you concreted in?
Cheers
Paul
Are you using galvanised box sections for your supports you concreted in?
Cheers
Paul
Apologies for being so slack with the thread updates
Here goes................
SIPS ready for EPDM rubber roof. Went for the hopefully fit and forget option
EPDM roof installed. Should have been simple but it was a very hot day and the glue went off really quick so there are patches that didn't stick down. Stuck down securely at the edges which is the main thing.
Started cladding the shed with Cedar
More Cladding
Guttering around the back
All finished outside. Painted the cedar with two coats of OSMO UV oil
All electrics done - 2 outside sockets, alarm, PIR and lights & provision for deck lights
Electrician has done his thing inside, batten the walls & plasterboard. CAT6 and TV points in both rooms
Skimmed and painted white
Here goes................
SIPS ready for EPDM rubber roof. Went for the hopefully fit and forget option
EPDM roof installed. Should have been simple but it was a very hot day and the glue went off really quick so there are patches that didn't stick down. Stuck down securely at the edges which is the main thing.
Started cladding the shed with Cedar
More Cladding
Guttering around the back
All finished outside. Painted the cedar with two coats of OSMO UV oil
All electrics done - 2 outside sockets, alarm, PIR and lights & provision for deck lights
Electrician has done his thing inside, batten the walls & plasterboard. CAT6 and TV points in both rooms
Skimmed and painted white
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff