Eye Shield Anchors M6 x 80mm - what sized drill bit
Discussion
got a packet of these sitting about that i'd like to use for something
http://www.screwfix.com/p/eye-shield-anchor-m6-pac...
what sized drill bit do i use, says M6 on the shaft
sorry for such a simple question
http://www.screwfix.com/p/eye-shield-anchor-m6-pac...
what sized drill bit do i use, says M6 on the shaft
sorry for such a simple question
GAjon said:
Can't be certain off that picture, but it looks the same as a Rawlbolt and for a 6mm rawl you use a 12mm drill bit.
To be sure measure the expanding case O/D and drill at that size:
This I'd say, I slacken the case so its not expanded at all then measure itor if im being lazy I'll other up the masonary bits to the end and see which look right To be sure measure the expanding case O/D and drill at that size:
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff