Plasterboard Fixings 35mm or 50mm for 11kg mirror?
Discussion
Evoluzione said:
If the mirror doesn't need to be in a specific place then why not fix it to a stud?
Well it does need to go in a specificish place, but I'm a bit thick when working these things out.2x brown 30mm plugs are in, nice and tight. Mirror seems solid! Cheers everyone.
I will of course come back with an update in 12 months time if it falls off
Speaking of a bit thick, I hung nicely and then thought it was a bit low so had to do it again! May even go for a third time
!
Edited by SkinnyP on Sunday 14th September 13:25
barker22 said:
I'm not a fan of the pig tails or worms as people call them, they can be a mess and if they don't grab properly can leave you with a massive hole in the wall.
I would recommend these myself, but you need a specific setting tool to use them. So if you could borrow one that would be best as it works out expensive for putting 2 holes in the wall as a one off job.
http://www.screwfix.com/p/fischer-5-x-37s-bp-hm-me...
But the worms you initially looked at should be fine aslong as they grip the wall, you will know straight away if they have
^these- known as brolly bolts in the trade. best because they give a re-usable fixing.I would recommend these myself, but you need a specific setting tool to use them. So if you could borrow one that would be best as it works out expensive for putting 2 holes in the wall as a one off job.
http://www.screwfix.com/p/fischer-5-x-37s-bp-hm-me...
But the worms you initially looked at should be fine aslong as they grip the wall, you will know straight away if they have
Edited by barker22 on Saturday 13th September 10:41
Just as good are spring toggles, have no need for a setting tool and probably easier to remove:
http://www.screwfix.com/p/rawlplug-spring-toggles-...
Redi-drivas/worms etc are "okay" for intermediate loads but can be pulled out fairly easily.
raw plugs etc are all well and good if you don't mind it falling off the wall, they are designed for and will only give a secure fixing into solid walls. Either of the above fixings spread the load over a wider area overcoming the weakness of plasterboard.
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff