Fitting a shower tray
Discussion
just fitting one my self today and was going to put the tray on filler foam but for some strange reason \i desided to read the installation instructions and it says must be bedded on sand and cement so job stopped until tomorrow. Ive used ply under mine but onlt due to me having to raise it up as the trap hits the joist.
Im going straight on chipboard in the other bathroom.
Im going straight on chipboard in the other bathroom.
As mentioned chipboard is perfectly acceptable, 22 would have been better.
Another option is to use window packers to take up any discrepancies between floor and tray then use adhesive rather than sand & cement. Foam can also be used with the packers ONLY if you're handy with a foam gun.
Another option is to use window packers to take up any discrepancies between floor and tray then use adhesive rather than sand & cement. Foam can also be used with the packers ONLY if you're handy with a foam gun.
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff