Gloss or Satin?
Discussion
I've found water based wood paints are almost impossible to get a standard of finish anywhere near as good as oil based ones. So did the previous owner of our new home by the look of it - the wretched stuff complete with brushmarks, swirls and wobbly cutting in to the paint film is everywhere.
If you insist on using it then I'd go as matt as possible which will help disguise any flaws.
If you insist on using it then I'd go as matt as possible which will help disguise any flaws.
I've just done a load of internal woodwork and used Dulux Quick Dry Satinwood (not usually a fan of Dulux stuff) and am very impressed with a) the feel of it going on was just like oil based b) covered superb - going over woodwork that hadn't been done for over 20 years and had discoloured with bumps and scratches c) overall finish is really nice. Make sure you prepare well if going over old oil based, use a good synthetic brush (I used a Purdy) and two coats are needed for it to be fully hard (no undercoat required).
I've also used Johnstones Aqua Gloss and whilst I thought it was good I don't think it has great depth to its gloss and so have ended up doing 1 undercoat and 2 gloss coats it try and achieve anything like an oil finish, plus it doesn't do your brushes any good (one more plus for Satinwood is that it washes out really easily).
I've also used Johnstones Aqua Gloss and whilst I thought it was good I don't think it has great depth to its gloss and so have ended up doing 1 undercoat and 2 gloss coats it try and achieve anything like an oil finish, plus it doesn't do your brushes any good (one more plus for Satinwood is that it washes out really easily).
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff