Does this need planning permission?

[yellowtang]

Busa mav said:

Yellowtang,

Not quite

It needs to be 2m from the boundary if you want 4m high.

Edited by Busa mav on Saturday 2nd July 09:27

Sorry, yes it's 2m! If you are within 2m of a boundary then you cannot exceed 2.5m total height. Height measured from highest ground level.

[Spudler]

227bhp said:

OneTwo said:

With builder, for scale purposes. >2.5m? Bloody close I'd say.

Is that a flat roof made from 3x2?

Nope, 4 by twice.

Job looks like an abortion so why start to do it correctly now?

[Ashtray83]

47x97 at 400 centres is only good for a 2m span looks to be about 4m so according to details on the building regs site should be using 47x170

[paulwirral]

SAB888 said:

Counting the blocks it looks to be about 2.2M as it stands.

I wouldn't worry about counting the blocks , look at the state of the block work itself , I know it's probably gonna be rendered but still , show some pride in your work .

[EViS]

100mm timbers on a flat roof and blockwork which has had absolutely no thought put into it; OP, I wouldn't worry, that will cave in by this time next year .