991 GT3RS Fire Extinguisher

991 GT3RS Fire Extinguisher

Author
Discussion

ffmygale

Original Poster:

31 posts

125 months

Friday 1st July 2016
quotequote all
Just deciding whether to get the fire extinguisher fitted on my car - can anyone who has it fitted please tell me if it prevents the passenger seat moving forward at all? Also, can you still use the footwell mat when it is fitted?

Thanks

red997

1,304 posts

209 months

Friday 1st July 2016
quotequote all
I'd assume similar the the norm GT3
if so, then it does restrict the full range on forward movement.
you do get some however - no-ones complained in mine yet !

majordad

3,601 posts

197 months

Friday 1st July 2016
quotequote all
It also renders use of the passenger mat impossible, that said, mine is fitted.

stain

1,051 posts

210 months

Friday 1st July 2016
quotequote all
Yes it does and it buggers up the floor mat too.

Pip1968

1,348 posts

204 months

Friday 1st July 2016
quotequote all
A good carpet shop will be able to sort out the mat. I managed to get our one to cut out and re trim a Porsche mat to fit around a 996 fire extinguisher which obviously sits in the middle of the footwell. The central edge was finished exactly the same as the outside so looks like it was made like that.

Pip
Ps I think it cost me £10 to have done.

robgt3

2,585 posts

162 months

Friday 1st July 2016
quotequote all
The fire extinguisher presents no problem at all. My OPC ( D.Lovett Tewkesbury) installed it so that the seat moves as intended plus the fitment does not incroach on leg room in the footwell. Also it is perfectly easy to remove the carpet mat for cleaning. Enjoy your awesome car!

red997

1,304 posts

209 months

Saturday 2nd July 2016
quotequote all
mats fine in mine too - can be removed for cleaning etc.

ffmygale

Original Poster:

31 posts

125 months

Sunday 3rd July 2016
quotequote all
Thanks for the replies.

GT3ZZZ

925 posts

170 months

Sunday 3rd July 2016
quotequote all
The fixing bracket for the fire extinguisher has 2 long vertical channels for the screws so adjusting the height it sits at is easy. Some OPC's have done a poor job, taken the mat out and fixed it at floor level. It doesn't need to be like that, just ask them to leave the mat in place when they fit it.

However, the extinguisher does sit in the way of the seat forward/back pull if you have the 918/LWB seats. I can only move mine a small way forward before the seat adjustment pull comes up against the rear of the extinguisher.

majordad

3,601 posts

197 months

Sunday 3rd July 2016
quotequote all
Can we have some photos please of how owners / OPCs mounted theirs ?

red997

1,304 posts

209 months

Wednesday 6th July 2016
quotequote all
not the best pics, but may help
[/URL]
[/URL]
[/URL]