Alcove shelving project, ordering pre cut MDF?
Discussion
Looking for a bit of input on hiding wires, so have done some crappy mockups to illustrate
Option 1 is that I bring out the depth of the two shelves at the right height further than the chimney breast and go behind the TV, then box the wires into the shelves:
Not sure this will look weird or not. But will avoid the need to do option 2:
Drill a massive hole in the chimney breast diagonally and come out into the body of the shlelf to run the wires through there:
Avoids the shelf possibly looking odd as it sticks out further than the others and goes behind the TV, but requires a big hole to be cut through the chimney breast.
I know, it's obviously option 2 right?
Option 1 is that I bring out the depth of the two shelves at the right height further than the chimney breast and go behind the TV, then box the wires into the shelves:
Not sure this will look weird or not. But will avoid the need to do option 2:
Drill a massive hole in the chimney breast diagonally and come out into the body of the shlelf to run the wires through there:
Avoids the shelf possibly looking odd as it sticks out further than the others and goes behind the TV, but requires a big hole to be cut through the chimney breast.
I know, it's obviously option 2 right?
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff