MOT friendly Wiper Blades?
Discussion
Well the good news is my Cerb passed it's MOT today
It was flagged up as having:
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
At the moment I have the single 16" 1 piece blades fitted with jets built into the top of them like this, but obviously as today has proven these are not particularly MOT friendly
Anyone got recommendations for which ones are MOT friendly and a system that will actually spray the windscreen with enough water for them to be happy?
I might have to do the dredded Cerbera scuttle water jet conversion as well - just to keep them happy next year!
Regards
Alex
It was flagged up as having:
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
At the moment I have the single 16" 1 piece blades fitted with jets built into the top of them like this, but obviously as today has proven these are not particularly MOT friendly
Anyone got recommendations for which ones are MOT friendly and a system that will actually spray the windscreen with enough water for them to be happy?
I might have to do the dredded Cerbera scuttle water jet conversion as well - just to keep them happy next year!
Regards
Alex
Really difficult to reply to this ridiculous criticism without heaping a pile of 'jobsworth' abuse so I'll just say
Leven Windscreen systems
Leven Windscreen systems
Mr Cerbera said:
Really difficult to reply to this ridiculous criticism without heaping a pile of 'jobsworth' abuse so I'll just say
Leven Windscreen systems
I run these wipers Paul and they are absolutely faultless Leven Windscreen systems
Regards
Simon
Hi Alex
Glad you got a pass
All you need to do is add a non-return valve, then all will be ok
Good thing is they cost nothing i.e. £3
http://www.ebay.co.uk/itm/351576408329
Glad you got a pass
All you need to do is add a non-return valve, then all will be ok
Good thing is they cost nothing i.e. £3
http://www.ebay.co.uk/itm/351576408329
ukkid35 said:
Hi Alex
Glad you got a pass
All you need to do is add a non-return valve, then all will be ok
Good thing is they cost nothing i.e. £3
http://www.ebay.co.uk/itm/351576408329
Cheers Paul Glad you got a pass
All you need to do is add a non-return valve, then all will be ok
Good thing is they cost nothing i.e. £3
http://www.ebay.co.uk/itm/351576408329
NMidlane said:
Dumb question, is it the 16's for the cerb? Says only griff/chim and Tuscan. My wipers hardly touch my screen. I just drive faster so it runs off quicker
Yes 16" or as near as dammit !Sorry, didn't mention it, but that WAS the Cerbera selection page
Edited by Mr Cerbera on Monday 20th February 11:00
NMidlane said:
Cheers, just wanted to check as website didn't say it was was for the cerb, which I thought odd being on the cerb page. Thanks again
32 posts in 106 monthsDon't waste that post!
In all fairness what I'm saying is that it is worth paying attention to people who post infrequently as they probably exercise a degree of self editing
Gassing Station | Cerbera | Top of Page | What's New | My Stuff