Outdoor Socket
Discussion
I have a socket like this
Used for lawnmower, strummer and pressure washer.
Just wondering how do I know if it is rcd protected ? It's not an rcd socket but the old strummer used to trip out all the electrics when used !
The masterplug rcd plugs I can't image they will fit onto this as they look like this
I have seen this in B&Q. Would I be able to plug the extension lead into this then the equipment into the extension lead ?
Used for lawnmower, strummer and pressure washer.
Just wondering how do I know if it is rcd protected ? It's not an rcd socket but the old strummer used to trip out all the electrics when used !
The masterplug rcd plugs I can't image they will fit onto this as they look like this
I have seen this in B&Q. Would I be able to plug the extension lead into this then the equipment into the extension lead ?
hkp57 said:
Does it require and specific extra wiring or is a diy job ?Should be a straight forward swap. If the strimmer is causing the board to trip out, this won't solve it. You will have an issue somewhere on the wiring circuit.
I had a similar issue where the SDS drill would trip our board, or next doors lawn mower... It wasn't until we added an extension, where we found out prior to us moving in, a couple of 'guests' had set up residence an gnawed through a few wires. No issues anymore.
I had a similar issue where the SDS drill would trip our board, or next doors lawn mower... It wasn't until we added an extension, where we found out prior to us moving in, a couple of 'guests' had set up residence an gnawed through a few wires. No issues anymore.
bigdom said:
Should be a straight forward swap. If the strimmer is causing the board to trip out, this won't solve it. You will have an issue somewhere on the wiring circuit.
I had a similar issue where the SDS drill would trip our board, or next doors lawn mower... It wasn't until we added an extension, where we found out prior to us moving in, a couple of 'guests' had set up residence an gnawed through a few wires. No issues anymore.
The old strimmer used to the new one doesn't.I had a similar issue where the SDS drill would trip our board, or next doors lawn mower... It wasn't until we added an extension, where we found out prior to us moving in, a couple of 'guests' had set up residence an gnawed through a few wires. No issues anymore.
Downward said:
No just had a look it's all mem.
Not managed to electrocute myself in 14 years but safety 1st.
Are you sure, no device marked rcd or rccb with a little test button on it? Post a pic up if you like. Not managed to electrocute myself in 14 years but safety 1st.
Fitting an outdoor socket with no rcd protecting it is pretty shoddy and if thats the case the electrics could really do with a look over
I picked up an extension lead with rcd on the plug from tool station.
http://www.toolstation.com/shop/Electrical/d190/Ex...
http://www.toolstation.com/shop/Electrical/d190/Ex...
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff