Discussion
BertyFish said:
PM sent, I don't have many spare custards, my favourites are custards.
I do have very well steeped grants its 100vg and doesn't get on well with the wicks on nautilus, also some bannan gingerbread which is quite nice.
Sent some bits out to you bud, sorry, forgot to take the juice to work so had to send late tonight. Watch out out for the citrus juice, it's amazing but a bit strong on nic.... I love it I do have very well steeped grants its 100vg and doesn't get on well with the wicks on nautilus, also some bannan gingerbread which is quite nice.
Sorry forgot to ask if you've tried Ruthless Mandigo, sounds a bit up my street.
Vape club have plenty of Ruthless in stock.
Got a batch of Aerovape yesterday. Very clear and no real taste, hopefully they will get better.
I'm finding spectrum custard cream and digbys king a nice mix at the moment.
Vape club have plenty of Ruthless in stock.
Got a batch of Aerovape yesterday. Very clear and no real taste, hopefully they will get better.
I'm finding spectrum custard cream and digbys king a nice mix at the moment.
TX1 said:
This group buy from Alibaba by any chance as have wondered about a group purchase myself of some other items.
Same as you I do lots of research before a purchase however sometimes have to take a chance especially if its not going to break the bank.
It was on Planet of the Vapes TX1 - the Railbox is a load of dough for a genuine €330+, UTA2 is made in small numbers and is an f5 war to get one - not cheap at £170 either! Same as you I do lots of research before a purchase however sometimes have to take a chance especially if its not going to break the bank.
Cost £90 all in. Pics of both here, just need to wait now...
http://www.planetofthevapes.co.uk/forums/vaping-cl...
TurboFan said:
Hi all, kanger mini subtank question here.
Had this for a few days now and I'm starting to get spitting, gurgling and seeping ejuice from it. Initially I started with the 1.5ohm coil that came with it then switched to the 0.5 coil. Its after the latter swap that I have been having issues. Also, I'm getting no flavour. Just harsh throat burn plus the others issues etc.
The juice I have been using is sugar drizzle by cuttwood. Its 70vg 30pg mix @0.15 Nic.
What am I doing wrong? Works really well with the 1.5ohm coil and the flavour is full and strong. Any help will be greatly appreciated.
Regards.
I cured the spitting from my Nano by switching from 70/30 PG/VG to 50/50.Had this for a few days now and I'm starting to get spitting, gurgling and seeping ejuice from it. Initially I started with the 1.5ohm coil that came with it then switched to the 0.5 coil. Its after the latter swap that I have been having issues. Also, I'm getting no flavour. Just harsh throat burn plus the others issues etc.
The juice I have been using is sugar drizzle by cuttwood. Its 70vg 30pg mix @0.15 Nic.
What am I doing wrong? Works really well with the 1.5ohm coil and the flavour is full and strong. Any help will be greatly appreciated.
Regards.
Edited by TurboFan on Saturday 4th July 21:33
Edited by TurboFan on Saturday 4th July 21:34
stevoknevo said:
It was on Planet of the Vapes TX1 - the Railbox is a load of dough for a genuine €330+, UTA2 is made in small numbers and is an f5 war to get one - not cheap at £170 either!
Cost £90 all in. Pics of both here, just need to wait now...
http://www.planetofthevapes.co.uk/forums/vaping-cl...
OOoh.Cost £90 all in. Pics of both here, just need to wait now...
http://www.planetofthevapes.co.uk/forums/vaping-cl...
stevoknevo said:
TX1 said:
This group buy from Alibaba by any chance as have wondered about a group purchase myself of some other items.
Same as you I do lots of research before a purchase however sometimes have to take a chance especially if its not going to break the bank.
It was on Planet of the Vapes TX1 - the Railbox is a load of dough for a genuine €330+, UTA2 is made in small numbers and is an f5 war to get one - not cheap at £170 either! Same as you I do lots of research before a purchase however sometimes have to take a chance especially if its not going to break the bank.
Cost £90 all in. Pics of both here, just need to wait now...
http://www.planetofthevapes.co.uk/forums/vaping-cl...
Before I got my Gizmo I was searching all over for a clone and I found it on Alibaba but again had to buy 10 so ended up forking out for the genuine one.
VEA said:
stevoknevo said:
It was on Planet of the Vapes TX1 - the Railbox is a load of dough for a genuine €330+, UTA2 is made in small numbers and is an f5 war to get one - not cheap at £170 either!
Cost £90 all in. Pics of both here, just need to wait now...
http://www.planetofthevapes.co.uk/forums/vaping-cl...
OOoh.Cost £90 all in. Pics of both here, just need to wait now...
http://www.planetofthevapes.co.uk/forums/vaping-cl...
Way too strong for me unfortunately
The fella doing the group buy sent me a message saying he hasn't put it down since he got it, is buying another, and is considering a third to hide in the garage away from the Wife for the future.
@TX1 His MOQ for the Railbox was five.
Very tempted http://www.vaperexpo.co.uk/
You are likely to walk away with a bag full of juice samples. See all the later gear in person rather than photos on a website. I also want the new Triton tank and im sure I could get one there.
You are likely to walk away with a bag full of juice samples. See all the later gear in person rather than photos on a website. I also want the new Triton tank and im sure I could get one there.
Well got the istick 40w today, pretty straight forward as I am presuming its a very basic spec ( no experiance with TC mods) however at £37 cannot complain and for me its probably a good starting point for TC.
Have a .16 coil built in and seems ok, temp control comes in when I over vape so all looks good.
Pic with the Kayfun3.1 ( have a V4 ordered :-)
Have a .16 coil built in and seems ok, temp control comes in when I over vape so all looks good.
Pic with the Kayfun3.1 ( have a V4 ordered :-)
TX1 said:
Well got the istick 40w today, pretty straight forward as I am presuming its a very basic spec ( no experiance with TC mods) however at £37 cannot complain and for me its probably a good starting point for TC.
Have a .16 coil built in and seems ok, temp control comes in when I over vape so all looks good.
Pic with the Kayfun3.1 ( have a V4 ordered :-)
That was quick! I didn't think they were out yet? 37 quid for a TC mod's not to be sniffed at Have a .16 coil built in and seems ok, temp control comes in when I over vape so all looks good.
Pic with the Kayfun3.1 ( have a V4 ordered :-)
Tempted myself.Does this have the same issues I get with the dna40? Not recognising a new coil & locking the atty is 50/50
The V4's meant to be good.
TX1 said:
Well got the istick 40w today, pretty straight forward as I am presuming its a very basic spec ( no experiance with TC mods) however at £37 cannot complain and for me its probably a good starting point for TC.
Have a .16 coil built in and seems ok, temp control comes in when I over vape so all looks good.
Pic with the Kayfun3.1 ( have a V4 ordered :-)
Where'd you get that from?Have a .16 coil built in and seems ok, temp control comes in when I over vape so all looks good.
Pic with the Kayfun3.1 ( have a V4 ordered :-)
From http://www.ecigone.co.uk/
Only has black at the moment or had as do not know if he has any in stock, do not take any notice that it says in stock on his site, ask him as when I ordered last week it said they were in stock however he only got them monday or yesterday.
Not noticed any issues as yet Grif, have kayfun set on nickel and swapped it for kanger with ordinary coil, changed it to the ordinary settings and all was ok, when put kayfun back on and swapped settings to nickel it had the settings in memory for the kayfun from before.
Just realised what you meant Grif, yes same with this sometimes it recognises new tank and sometimes not as far as I can tell.
Only has black at the moment or had as do not know if he has any in stock, do not take any notice that it says in stock on his site, ask him as when I ordered last week it said they were in stock however he only got them monday or yesterday.
Not noticed any issues as yet Grif, have kayfun set on nickel and swapped it for kanger with ordinary coil, changed it to the ordinary settings and all was ok, when put kayfun back on and swapped settings to nickel it had the settings in memory for the kayfun from before.
Just realised what you meant Grif, yes same with this sometimes it recognises new tank and sometimes not as far as I can tell.
Edited by TX1 on Wednesday 8th July 16:52
Mines very hit & miss recognising a new coil and locking the atty's a right pain, if it doesn't lock the ohms jump around like crazy. Even if left for half hour or so to cool down still 50/50 chance of it all working properly. Annoying but works great when everything's in sync.
It's good but is be pissed if I'd paid £150 for it.
It's good but is be pissed if I'd paid £150 for it.
Yes £150 and get grief is a proper pain and would be very annoying.
Ohms have stayed the same so far, well its .16 or .17 so no big deal however the Kayfun V4 is known to have issues regarding the ohms jumping all over so not a good move on my part but from what I have read when it works its fantastic and it would be a shame not to give it a try at the knock down price they are going for.
Ohms have stayed the same so far, well its .16 or .17 so no big deal however the Kayfun V4 is known to have issues regarding the ohms jumping all over so not a good move on my part but from what I have read when it works its fantastic and it would be a shame not to give it a try at the knock down price they are going for.
Gassing Station | The Lounge | Top of Page | What's New | My Stuff