Show us your Leatherman...
Discussion
I had a Gerber Suspension...
Broke the spring on the scissors whilst cutting a piece paper which meant the rest of the tools on that handle were now loose.
Blade went dull after cutting through rubber.
Flathead driver snapped off.
The tabs that hold the handles in place snapped off rendering the pliers useless. Wouldn't mind but I was only stripping some wire.
If you guys can make them last more than 3 months then good for you. For mine, stripping wires and cutting paper was just too much to handle
My Leatherman Charge TTI has lasted a year now and has taken a lot more abuse and still works perfect.
Broke the spring on the scissors whilst cutting a piece paper which meant the rest of the tools on that handle were now loose.
Blade went dull after cutting through rubber.
Flathead driver snapped off.
The tabs that hold the handles in place snapped off rendering the pliers useless. Wouldn't mind but I was only stripping some wire.
If you guys can make them last more than 3 months then good for you. For mine, stripping wires and cutting paper was just too much to handle
My Leatherman Charge TTI has lasted a year now and has taken a lot more abuse and still works perfect.
Luffehamp said:
I had a Gerber Suspension...
Broke the spring on the scissors whilst cutting a piece paper which meant the rest of the tools on that handle were now loose.
Blade went dull after cutting through rubber.
Flathead driver snapped off.
The tabs that hold the handles in place snapped off rendering the pliers useless. Wouldn't mind but I was only stripping some wire.
If you guys can make them last more than 3 months then good for you. For mine, stripping wires and cutting paper was just too much to handle
My Leatherman Charge TTI has lasted a year now and has taken a lot more abuse and still works perfect.
Good post, agree with this. Broke the spring on the scissors whilst cutting a piece paper which meant the rest of the tools on that handle were now loose.
Blade went dull after cutting through rubber.
Flathead driver snapped off.
The tabs that hold the handles in place snapped off rendering the pliers useless. Wouldn't mind but I was only stripping some wire.
If you guys can make them last more than 3 months then good for you. For mine, stripping wires and cutting paper was just too much to handle
My Leatherman Charge TTI has lasted a year now and has taken a lot more abuse and still works perfect.
For proper jobs I have a Victorinox Swisstool. Gerber and Leathermans quality is far far inferior to victorinox.
http://www.heinnie.com/victorinox-swisstool-x
Foliage said:
Good post, agree with this.
For proper jobs I have a Victorinox Swisstool. Gerber and Leathermans quality is far far inferior to victorinox.
http://www.heinnie.com/victorinox-swisstool-x
Owning several victorinox swiss army knives and a leatherman skeletool I'd say they are comparable. Different but similar quality. For example the blades on my SAKs are much finer than the chunky thing on the leatherman. For proper jobs I have a Victorinox Swisstool. Gerber and Leathermans quality is far far inferior to victorinox.
http://www.heinnie.com/victorinox-swisstool-x
TheJimi said:
Nope
I've bailed on the suspension. Cancelled my order and will be ordering a Leatherman Juice or Wave instead
I've bailed on the suspension. Cancelled my order and will be ordering a Leatherman Juice or Wave instead
Are you near a Gooutdoors they price match then knock another 10% off, never paid full price for anything that I've bought from there. Charge al is a much better knife if you can stretch a little more. Might buy one next week. Will pay around £90 at Gooutdoors. instead of £150..
JackP1 said:
Nope I've bailed on the suspension. Cancelled my order and will be ordering a Leatherman Juice or Wave instead
TheJimi said:
Nope
I've bailed on the suspension. Cancelled my order and will be ordering a Leatherman Juice or Wave instead
Good call, you don't want to be classed as a second class citizen for owning a Gerber save up a little more and get the charge al, its a better knife than the wave.. ill get pics up tomorrow night if it in stock..I've bailed on the suspension. Cancelled my order and will be ordering a Leatherman Juice or Wave instead
Avidfanofstuff said:
I hear you and normally I'm a sucker for a bargain, I've just got no time to drive out to Canterbury and sort it.
If I had I would have been all over it!
Will post up some pics when it arrives withe the rest of my collection.
When do we get to see the Leatherman family photos then ??? If I had I would have been all over it!
Will post up some pics when it arrives withe the rest of my collection.
abbotsmike said:
Owning several victorinox swiss army knives and a leatherman skeletool I'd say they are comparable. Different but similar quality. For example the blades on my SAKs are much finer than the chunky thing on the leatherman.
I beg to differ, the newer US made leathermans are perhaps comparable but I have always struggled with the steel used its far to hard (154cm / 440c etc) but ive previously had Chinese made leathermans that were terrible but had rather good steel consistency, victorinox have a consistent ethos and have always been made in Switzerland with the same steel that I can easily get shaving sharp, I have 15-20 SAKs.Yes im a SAK fan boy.
gtidriver said:
Ive done a little reading on the made in china. It seams to be the accessories and sheaves that are made in china not the multi tools themselves. Whats your best Victorinox? mine was the Swisstool spirit till last Wednesday..
Parts used to come from all over the world (mexico, china, europe), not sure about now. Check out the class action law suit.Best as in most expensive? or most tools or favourites?
most expensive/most tools, are swisstool x, swiss champ and work champ.
Favourites farmer & my first SAK which is a Camper which I got in the 80s, and my EDC and most favourite as its so handy and easy to carry is rambler, was thinking about switching that for a midnight manager but im holding out for a cree version.
Edited by Foliage on Friday 27th March 16:21
Gassing Station | The Lounge | Top of Page | What's New | My Stuff