Show us your new shoes
Discussion
FreeLitres said:
Was going to ask if his cat died just before going into the shop.
Imagine how miserable he would be if he was going into Brantano!
EDIT: Jokes aside, I would love to go through that bespoke experience IR, so enjoy.
Although I guess, it might not be your first time!
Cheers. Imagine how miserable he would be if he was going into Brantano!
EDIT: Jokes aside, I would love to go through that bespoke experience IR, so enjoy.
Although I guess, it might not be your first time! Edited by FreeLitres on Saturday 24th September 19:38
It is my first bespoke actually so I was hiding the excitement well.
Goaty Bill 2 said:
I wore trousers of a similar style to their high-rise for work way back when.
Before I discovered life in an office.
They were so comfortable, especially when dispensing with a belt in favour of braces.
I love mine and wear them occasionally, they are way way too warm for summer, perfectly for winter.Before I discovered life in an office.
They were so comfortable, especially when dispensing with a belt in favour of braces.
You couldn't wear yours in the office?
craigjm said:
What made you go for bespoke shoes and why that maker? do you find that standard shoes don't quite fit right?
I served in Cyprus for a time. It was a while back now, but the chaps would draw around your foot, invite you to choose a style, then make the just-about-perfect shoes for not very much money. Same with shirts (although nothing to do with foot size, obvs) and suits. With trips to Cyprus and Hong Kong a chap was sorted. Well, he was sorted until middle age set in and he became a little larger in his 30s and 40s than he was in his hyper-active 20s. After that, reality set in.
CharlesdeGaulle said:
craigjm said:
What made you go for bespoke shoes and why that maker? do you find that standard shoes don't quite fit right?
I served in Cyprus for a time. It was a while back now, but the chaps would draw around your foot, invite you to choose a style, then make the just-about-perfect shoes for not very much money. Same with shirts (although nothing to do with foot size, obvs) and suits. With trips to Cyprus and Hong Kong a chap was sorted. Well, he was sorted until middle age set in and he became a little larger in his 30s and 40s than he was in his hyper-active 20s. After that, reality set in.
InductionRoar said:
g3org3y said:
What have you got planned?I know it would be vulgar to ask how much...
I'm kind of interested to learn what the process is for bespoke.
sidekickdmr said:
Just picked up both sets of toms and the multi colour ones are more red/blue in the flesh, not pink
I also got a pair after seeing this. They actually look quite good IRL.
Went for 8.5 but they are a bit small for me so I've ordered the 9.5. Hopefully they'll fit better. Bargain for £16.99.
g3org3y said:
Are the cheaper ones cemented/glued sole? Is the leather/details poorer quality too?
I think JW shoes are a little but too avantgarde for me (especially for work outfits).
Craig, any idea on this pair of JWs? Decent or cheapo version? Can't find them on the website but given they are on TK Maxx, they are probably last season/old stock. I think JW shoes are a little but too avantgarde for me (especially for work outfits).
They seem just about subtle enough that I could wear them to work.
Halb said:
Goaty Bill 2 said:
I wore trousers of a similar style to their high-rise for work way back when.
Before I discovered life in an office.
They were so comfortable, especially when dispensing with a belt in favour of braces.
I love mine and wear them occasionally, they are way way too warm for summer, perfectly for winter.Before I discovered life in an office.
They were so comfortable, especially when dispensing with a belt in favour of braces.
You couldn't wear yours in the office?
Where we were working, there were no offices for 40-60 miles.
A few deer, occasional elk herd, and the odd bear or wolf pack.
Shoe thread relevance photo;
No Saphir Médaille d'Or shoe polish for these, just bear grease.
Work 'shoes' were not allowed in the office
g3org3y said:
Craig, any idea on this pair of JWs? Decent or cheapo version? Can't find them on the website but given they are on TK Maxx, they are probably last season/old stock.
They seem just about subtle enough that I could wear them to work.
I have never seen those before so they certainly haven't featured in their premium range in the last 10 years or so. They seem just about subtle enough that I could wear them to work.
craigjm said:
What made you go for bespoke shoes and why that maker? do you find that standard shoes don't quite fit right?
I don't have a particular issue with the fit of my RTW shoes, it is more to do with the workmanship and free reign to have any stylistic feature I wish - some of which are not possible on machine made shoes. As regards the maker I like their history the most (and distinguished clients) and after phoning the other London makers Cleverleys were the ones that seemed most enthusiastic about making shoes for me.
FreeLitres said:
What are those shoes on display? Are they just some examples to help you chose the features/materials you want, or do they also make some RTW shoes?
They are mostly bespoke samples but some are RTW shoes and yes, they are purely for inspiration and not for sale - some are very old.kelv_w said:
Can't wait to see the GCs.
Just wondering if C&J are still making shoes for RTW GeorgeCleverly?
As I understand it GC have two RTW lines. C&J make their entry level and EG make their top level. The only shoes actually made by GC are bespoke and they are made above the shop Just wondering if C&J are still making shoes for RTW GeorgeCleverly?
FreeLitres said:
Also, other than being a brown oxford, have you requested a particular style? Did you request a more chiseled Italian look (a bit like your G&G) or a more rounded traditional English. Does the maker have their own signature "style" but you just specify the detail like the brogue areas?
I'm kind of interested to learn what the process is for bespoke.
They will be oxfords with a brogued and gimped toe cap (no medallion) and a round English style toe. They do have their house style 'suspiciously square' toes as they call them but they are more than happy make the more classic round toes too.I'm kind of interested to learn what the process is for bespoke.
As regards the actual finishing touches I have requested them to be as narrowly waisted as possible and to feature a fiddleback waist, notched heel, contrasting welt stitching and a seamless back.
The bespoke process is they stand you on that book and draw around your feet twice at different angles to give a sort of 3D representation. The wooden tool measures the length and a fabric tape measure is used at specific places (some with weight on and some with weight off) and that is it.
I expect to be going back in February for the first fitting where they will have no sole or heel so any alterations in fit can be made. Then, 3-6 months later the finished articles should be ready unless there were any drastic alterations required at the fitting.
I will take some photos at the second fitting.
InductionRoar said:
craigjm said:
What made you go for bespoke shoes and why that maker? do you find that standard shoes don't quite fit right?
I don't have a particular issue with the fit of my RTW shoes, it is more to do with the workmanship and free reign to have any stylistic feature I wish - some of which are not possible on machine made shoes. As regards the maker I like their history the most (and distinguished clients) and after phoning the other London makers Cleverleys were the ones that seemed most enthusiastic about making shoes for me.
Good luck with it. Will be interested to see the final result
InductionRoar - keep us updated with your future visits!
Are you intending to wear these bespokes as part of your usual rotation or only for special occasions?
I try to be as careful as possible when wearing my "best" shoes (Church/C&J level) but they always seem to pick up little knocks an scrapes during the day. I don't really mind as it adds a bit of character and I know I can replace them fairly easily if anything major happens. I'm not sure how relaxed I would feel if they were alot more expensive to replace!
Are you intending to wear these bespokes as part of your usual rotation or only for special occasions?
I try to be as careful as possible when wearing my "best" shoes (Church/C&J level) but they always seem to pick up little knocks an scrapes during the day. I don't really mind as it adds a bit of character and I know I can replace them fairly easily if anything major happens. I'm not sure how relaxed I would feel if they were alot more expensive to replace!
InductionRoar said:
They will be oxfords with a brogued and gimped toe cap (no medallion) and a round English style toe. They do have their house style 'suspiciously square' toes as they call them but they are more than happy make the more classic round toes too.
As regards the actual finishing touches I have requested them to be as narrowly waisted as possible and to feature a fiddleback waist, notched heel, contrasting welt stitching and a seamless back.
The bespoke process is they stand you on that book and draw around your feet twice at different angles to give a sort of 3D representation. The wooden tool measures the length and a fabric tape measure is used at specific places (some with weight on and some with weight off) and that is it.
I expect to be going back in February for the first fitting where they will have no sole or heel so any alterations in fit can be made. Then, 3-6 months later the finished articles should be ready unless there were any drastic alterations required at the fitting.
I will take some photos at the second fitting.
This is excellent, congratulations IR. Cleverley is a good choice. I'm not a fan of their chiselled toe but their round toe is very nice and they certainly know how to build a shoe. The little shop in the arcade is great, too. They always seem to manage to sell me a belt or a wallet while I'm there :-).As regards the actual finishing touches I have requested them to be as narrowly waisted as possible and to feature a fiddleback waist, notched heel, contrasting welt stitching and a seamless back.
The bespoke process is they stand you on that book and draw around your feet twice at different angles to give a sort of 3D representation. The wooden tool measures the length and a fabric tape measure is used at specific places (some with weight on and some with weight off) and that is it.
I expect to be going back in February for the first fitting where they will have no sole or heel so any alterations in fit can be made. Then, 3-6 months later the finished articles should be ready unless there were any drastic alterations required at the fitting.
I will take some photos at the second fitting.
You're probably already aware of this but it can take a few goes to get it right with bespoke shoes - don't be afraid to work with them if things aren't quite perfect first time and have fun with the process :-). I think the trousers are outstanding
Gassing Station | The Lounge | Top of Page | What's New | My Stuff