3.3 type r

[JollyGrnMonster]

It fits lol, trial fit a success



Simon

[GravelBen]

Did you use the 3.3 SVX motor? Out of interest why did you go for that instead of the newer EZ30R?

[JollyGrnMonster]

SVX engine yes.

Its a 2.2 with two extra cylinders ie. Known, parts available etc..

the actual engine that will be in the car when complete is having forged pistons, custom rods, billet cams and the block pinned etc..

Simon

Edited by JollyGrnMonster on Monday 31st January 00:01

[rhinochopig]

Is this going to be a TA car? If so why the flat 6 - drive out of slow speed corners?

Seems an odd choice given the increased weight and cost, when the four pots can make big power.

If it's just because then - Well done Sir!

[markCSC]

That's fab! Top marks for doing it

[GravelBen]

JollyGrnMonster said:

Its a 2.2 with two extra cylinders ie. Known, parts available etc..

the actual engine that will be in the car when complete is having forged pistons, custom rods, billet cams and the block pinned etc..

Fair enough then

There is an Impreza hillclimb car down here with a twin-turbo EZ30 that goes very well and sounds amazing.

http://www.linkecu.com/newsfromlink/h6finalrun2006

[Hol]

I always thought you had an insane streak Simon.


I do look forward to seeing it completed though.

[JollyGrnMonster]

rhinochopig said:

Is this going to be a TA car? If so why the flat 6 - drive out of slow speed corners?

Seems an odd choice given the increased weight and cost, when the four pots can make big power.

If it's just because then - Well done Sir!

Road, track, sprint etc replacing my current classic with a 4 pot.
Different and next step really current flat4 with a gt35r without nos is about as laggy as I am willing to go but 665bhp is not enOugh lol

So flat6 an alternative route.

[JollyGrnMonster]

Hol said:

I always thought you had an insane streak Simon.


I do look forward to seeing it completed though.

Thanks, I think

[DocJock]

Sounds cool.

Did Pat H ever finish his?

[chuntington101]

Very intresting! How much power are you lookign for out the new engine?

[rhinochopig]

JollyGrnMonster said:

Road, track, sprint etc replacing my current classic with a 4 pot.
Different and next step really current flat4 with a gt35r without nos is about as laggy as I am willing to go but 665bhp is not enOugh lol

So flat6 an alternative route.

Sounds a sensible, if very expensive approach. Will you be using a twin sequential turbo set-up then to minimise lag.

Out of interest would a supercharger / tubo set-up on the flat four not have given you the same results?

[GravelBen]

rhinochopig said:

Will you be using a twin sequential turbo set-up then to minimise lag.

More likely smaller twins in parallel I expect, the extra capacity will help spool them faster too. Just look at what Porsche do with their flat-6 for a good example to follow.

[rhinochopig]

GravelBen said:

More likely smaller twins in parallel I expect, the extra capacity will help spool them faster too. Just look at what Porsche do with their flat-6 for a good example to follow.

You mean like the 959

Just kidding.

[klimakool]

looks amazing, and hope one day to see the finished product. if i can help in anyway sourcing parts with my hks and blitz account feel free to give me a shout

[Hol]

JollyGrnMonster said:

Thanks, I think

Dont worry, it was a compliment. I like seeing conversions like this.

I haven't tried to make anything close to this fit since I was 18 and stuck a Maxi1750GT in the front of a mini shell. My mum still hasnt forgiven me for riveting her large roasting tray on top of the hole in the bonnet to cover the top of the engine.

[JollyGrnMonster]

DocJock said:

Sounds cool.

Did Pat H ever finish his?

Think he has built / helped build others but not his own.

That engine is his on loan for fabricating as my own is being built

[JollyGrnMonster]

rhinochopig said:

Sounds a sensible, if very expensive approach. Will you be using a twin sequential turbo set-up then to minimise lag.

Out of interest would a supercharger / tubo set-up on the flat four not have given you the same results?

With a pair of 350bhp turbos I hope to make 700bhp on vpower then have racefuel adnd nos

No flat4 would be laggier

[JollyGrnMonster]

klimakool said:

looks amazing, and hope one day to see the finished product. if i can help in anyway sourcing parts with my hks and blitz account feel free to give me a shout

Wont be long

Goes for paint later this month and forged engine nearly finished

[JollyGrnMonster]

klimakool said:

looks amazing, and hope one day to see the finished product. if i can help in anyway sourcing parts with my hks and blitz account feel free to give me a shout

Wont be long

Goes for paint later this month and forged engine nearly finished