Can anyone tiell me what this is called in the picture

Can anyone tiell me what this is called in the picture

Author
Discussion

minos316

Original Poster:

32 posts

125 months

Friday 31st July 2015
quotequote all
Can anyone tell me what this is called in the picture? I thinks its something to do with the air intake. I have a weird noise coming from this location when in neutral, goes when the clutch is in. Thought it was the gearbox on its way out until it got a lot louder and caused me to investigate. However its not the gearbox but a racket coming from in this box. it sound like a really old fan whirring when in neutral and now during transit more so when cold.

Just wondering if anyone can tell me what that specific box is called. Also will probably open it up myself and see whats what. Just don't want to take it apart and have the car fall a part. Any insight as to what the whirring noise maybe also welcome. Like i said it sounds like some sort of fan, Could be some sort of air leak as well i suppose. Will have to check it out.

Whats the correct name of that black box (marked with a yellow X) in the picture?

Edited by minos316 on Friday 31st July 03:34

Butter Face

30,279 posts

160 months

Friday 31st July 2015
quotequote all
Looks like a resonator of some kind? Used as part of the intake system to reduce the noise.

I'd take it out and pull it apart. Can't do that much harm. I can't see why it would be making any noise though, they're normally just empty plastic boxes!

andyiley

9,198 posts

152 months

Friday 31st July 2015
quotequote all
The noise you describe sounds like a clutch release bearing on its way out, the gearbox is right under where you indicate.

minos316

Original Poster:

32 posts

125 months

Friday 31st July 2015
quotequote all
Will be scrapping it if its anything to do with the gearbox. Defo sounds like its coming from in that box however if the gearbox is under also possible then. Have to take it apart and have look into it. Will have a month to find another car if it is the gearbox.

Gut feeling was something to do with the transmission however me and friend agreed that it actually sounded like it was coming from in that box.

Edited by minos316 on Friday 31st July 17:41

Butter Face

30,279 posts

160 months

Friday 31st July 2015
quotequote all
andyiley said:
The noise you describe sounds like a clutch release bearing on its way out, the gearbox is right under where you indicate.
After reading the description again I'm inclined to agree. Keep using it until it fails if you're not bothered about the car!

imagineifyeswill

1,226 posts

166 months

Friday 31st July 2015
quotequote all
Looking at that picture I assume that its a Honda Civic, under that piece of black plastic is the gearbox, from the noise you describe I would take an educated guess that the first motion shaft bearing is noisy very common fault on Civics, bearing and seal about £32.00 from Honda about 6 hours work to repair.

minos316

Original Poster:

32 posts

125 months

Friday 31st July 2015
quotequote all
Have made some videos. Can anyone advise what it could be. Cant get the car in the shop till thursday next week, so may as well get some opinions in the meantime. Gut tells me its something to do with the transmission, however both me and a friend are near certain the noise is coming from the air intake system.

1 neutral cold start
http://tinypic.com/r/55gu2e/8

2 in transit
http://tinypic.com/r/21nkyev/8

3 neutral acceleration only
http://tinypic.com/r/2nw01hd/8

4 stationary bonet open in neutral
http://tinypic.com/r/elb6vc/8

So what you guys reckon it could be?

Some other info I have zero problems with a slipping clutch or grinding gears. Neither of these things occur. Just this racket.
Noise occurs going forward and reverse. More prevalent at slow speeds 30mph or less.

To me ths sounds like an old dirty fan or a type of belt rubbing on something, that's what the sound reminds me of.

Edited by minos316 on Friday 31st July 22:09


Edited by minos316 on Friday 31st July 23:01

imagineifyeswill

1,226 posts

166 months

Saturday 1st August 2015
quotequote all
N.o. 1 sounds just like I said the first motion shaft bearing, pressing the clutch stops the engine from driving the shaft so noise disappears, all the others sound so noisy I would expect something to go bang at any minute.

minos316

Original Poster:

32 posts

125 months

Saturday 1st August 2015
quotequote all
is that the big ass expensive repair where the transmission needs to be taken out and split in two?

If so may sell it as spares repair cut my losses and get something else. I could afford to get it fixed but my luck is after getting it fixed exactly 12 months and one day after the repair it would reoccur.

Car is a 02 Honda civic S 1.4, has 74000 miles on the clock. Due an mot as well possibly some tyres and the Big ass transmission repair and maybe other stuff for the mot, cars probably worth a grand at a stretch. Not really worth fixing i think, shame love the car.

What do you reckon i could get for this just selling as spares repair? The cambelt and water pump job was done a year ago not that it matters if the transmission is waiting to explode.

would £500 be to much of an ask?

Edited by minos316 on Saturday 1st August 04:08

PositronicRay

27,006 posts

183 months

Saturday 1st August 2015
quotequote all
If it's a runner with an MOT someone will spend £500 on it. How about a tranny from a scrapper?

imagineifyeswill

1,226 posts

166 months

Saturday 1st August 2015
quotequote all
Its around a 6 hour job to remove the gearbox split in two and replace bearing and seal refit gearbox, but unfortunately that box sounds like it may be to far gone to save with just the one bearing. To remove the box and fit a s/hand unit is 4- 4.5 hours the only problem being unless you can hear the replacement box running in the donor vehicle you may buying another box with the same problem, Ive replaced the bearing in four in the last year or so its very common, really about the only common problem with the Civic.

imagineifyeswill

1,226 posts

166 months

Saturday 1st August 2015
quotequote all
Its around a 6 hour job to remove the gearbox split in two and replace bearing and seal refit gearbox, but unfortunately that box sounds like it may be to far gone to save with just the one bearing. To remove the box and fit a s/hand unit is 4- 4.5 hours the only problem being unless you can hear the replacement box running in the donor vehicle you may be buying another box with the same problem, Ive replaced the bearing in four in the last year or so its very common, really about the only common problem with the Civic.

minos316

Original Poster:

32 posts

125 months

Saturday 1st August 2015
quotequote all
Yeh its a shame really. I would consider replacing the box but with other things that also need to be done its not really worth it. Brings the bill close to what its worth. There a crap tonne of civics around for sale atm round where I am. I love Hondas but this issue is definitely making me think of getting a different brand now.

minos316

Original Poster:

32 posts

125 months

Saturday 1st August 2015
quotequote all
imagineifyeswill said:
Its around a 6 hour job to remove the gearbox split in two and replace bearing and seal refit gearbox, but unfortunately that box sounds like it may be to far gone to save with just the one bearing. To remove the box and fit a s/hand unit is 4- 4.5 hours the only problem being unless you can hear the replacement box running in the donor vehicle you may be buying another box with the same problem, Ive replaced the bearing in four in the last year or so its very common, really about the only common problem with the Civic.
What else about the noise make you thinks its completely stuffed, other than bearings?

minos316

Original Poster:

32 posts

125 months

Sunday 2nd August 2015
quotequote all
Got a friend who can help me drop the transmission. Could then just drop it off at a garage and get them to do the work couple of hours labour and put it back in myself. Save a small fortune. Sounds like a plan.

imagineifyeswill

1,226 posts

166 months

Monday 3rd August 2015
quotequote all
It just sounds so noisy in the recordings outside the car,quite possibly damage to gear and synchros if other bearings are gone. Replacing the first motion shaft bearing is a simple job no special tools required but mainshaft and layshaft bearings becomes a bit more involved.

minos316

Original Poster:

32 posts

125 months

Wednesday 19th August 2015
quotequote all
Do you reckon more in the box could have gone then as well as the bearings? No point bothering if the damage is worth that what i initially thought.

imagineifyeswill

1,226 posts

166 months

Thursday 20th August 2015
quotequote all
its hard to say listening to a recording, the first one is just typical first motion shaft bearing noise, as Ive said very common on that modelof civics and a fairly simple job for someone who knows what there doing. The second a third recordings sound so noisy that I havent got a clue it could be something totally unrelated, could be the bearing sound combined with general underbonnet noise difficult to say, I normally diagnose the bearing from the drivers seat with the doors closed very easy to recognise by someone who works with cars all the time.