Help me to find the right union.

Help me to find the right union.

Author
Discussion

GForce2010

Original Poster:

2 posts

102 months

Monday 25th April 2016
quotequote all
Hi.

I am replacing a brake pipe on my MG ZS and I have having a hard job trying to find the correct unions. On the end that goes into the ABS unit it needs a M10x1.0mm bolt with a non threaded tip suitable for standard DIN bubble flare. These are easy and I already have a load of replacements.

Its the union for the flexi pipe that is being elusive. This one is a M10x1.0MM bolt that is fully threaded. What makes it difficult to find is this ones needs to support a double flare so the end of the bolt needs to have a 45 degree invert so half the flare sit inside the union.

Can anybody point me in the right direction to find this union?

Thanks.

Spangles

1,441 posts

184 months

Monday 25th April 2016
quotequote all
Not much help but can you not reuse the old one?

steveo3002

10,493 posts

173 months

Monday 25th April 2016
quotequote all
http://www.brake-lines.co.uk/create-your-custom-br...

anything on there? or maybe call em and ask