Do you use a torque wrench or go by feel?
Discussion
Just wondering if most PH home mechanics use a torque wrench (and go to the associated trouble of researching torque settings), or do most say "it'll be fine" and just go by feel?
I don't have a torque wrench and should probably buy one. TBH, the idea of trying to find the correct torque settings for everything puts me off more than the cost of the tool, but obviously if it has to be done, it has to be done. Still beats paying a garage to do it.
I don't have a torque wrench and should probably buy one. TBH, the idea of trying to find the correct torque settings for everything puts me off more than the cost of the tool, but obviously if it has to be done, it has to be done. Still beats paying a garage to do it.
donteatpeople said:
It depends on what its securing. Brakes, wheels, anything directly safety related I'll use a torque wrench (also small things into aluminium, that's not the type of stripping I like to see). Bits of interior trim or washer bottle mountings, it'll be fine.
Much the same.Baldchap said:
I have both big (For effin' tight) and small (for not so tight) torque wrenches.
Ditto. Plus one in inch/lbs for really squeaky bum ones.
I used to use a torque wrench a lot but I reckon mine has gone a reasonable way out of calibration on the lower end of the scale that it was over tightening some fasteners quite significantly. I've never broken anything off with it but when your mind is telling you 'this ain't quite right' then in my experience it means something isn't as it should be.
Baldchap said:
Always amazes me how many wheel nuts aren't properly torqued by professionals.
As far as I can tell all the tyre places seem to use a power/air gun and tighten till it stops. Never noticed them checking/setting the correct torque for the particular car they are working on.Am I mistaken? Or do they use the same torque setting for every car they change the tyres on?
MikeStroud said:
Baldchap said:
Always amazes me how many wheel nuts aren't properly torqued by professionals.
As far as I can tell all the tyre places seem to use a power/air gun and tighten till it stops. Never noticed them checking/setting the correct torque for the particular car they are working on.Am I mistaken? Or do they use the same torque setting for every car they change the tyres on?
MikeStroud said:
Baldchap said:
Always amazes me how many wheel nuts aren't properly torqued by professionals.
As far as I can tell all the tyre places seem to use a power/air gun and tighten till it stops. Never noticed them checking/setting the correct torque for the particular car they are working on.Am I mistaken? Or do they use the same torque setting for every car they change the tyres on?
Mine spin the bolts in with a air gun but stop before the dugga dugga point - the then had tighten with a proper torque wrench it's always at least a 1/4 to half turn before the wrench clicks
Went to a fast fit company who are very "quick" once - the "technician" wound in all the bolts to 20 dugga duggas he then went round with a torque wrench and "checked" every bolt - each one clicked before any movement
I pointed out the stupidity of this "check" and got absolutely nowhere with the "technician" or the "manager"
I re-did all the wheel bolts when I got home and Christ they were bloody tight - I needed a little leverage on a breaker bar to crack them free
B'stard Child said:
Went to a fast fit company who are very "quick" once - the "technician" wound in all the bolts to 20 dugga duggas he then went round with a torque wrench and "checked" every bolt - each one clicked before any movement
I pointed out the stupidity of this "check" and got absolutely nowhere with the "technician" or the "manager"
Unfortunately in those type of establishments that is generally the level of staff that you are dealing with...I pointed out the stupidity of this "check" and got absolutely nowhere with the "technician" or the "manager"
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff