Hidden Ferrari Rust

Hidden Ferrari Rust

Author
Discussion

Caruso

Original Poster:

7,436 posts

256 months

Sunday 25th September 2016
quotequote all
Having recently spent a small fortune on bodywork restoration I was slightly horrified to find this when they took of the front undertray to do some suspension work.


Wilmslowboy

4,208 posts

206 months

Sunday 25th September 2016
quotequote all

looks almost dangerous frown

was it found after all the body work was done ??
On the surface is looks like one of the best looking 308 GT4s


Caruso

Original Poster:

7,436 posts

256 months

Sunday 25th September 2016
quotequote all
Yes, after the bodywork. But the chassis is separate from the bodywork on these.

battered

4,088 posts

147 months

Sunday 25th September 2016
quotequote all
Wilmslowboy said:
looks almost dangerous frown

was it found after all the body work was done ??
On the surface is looks like one of the best looking 308 GT4s
"Almost"? It looks entirely dangerous. It's "almost" completely disappeared. How much more would have to dissolve before you'd think it was "actually" dangerous? I'm amazed the MoT man didn't fail it. It's hardly solely cosmetic, after all, and I don'y imagine that Ferrari were in the habit of introducing steelwork under their cars without good reason.

Caruso

Original Poster:

7,436 posts

256 months

Sunday 25th September 2016
quotequote all
This was hidden behind the front undertray so you wouldn't spot it without removing about 10 bolts to get the panel off.

battered

4,088 posts

147 months

Sunday 25th September 2016
quotequote all
I'd imagined as much, because the MoT tester isn't allowed to dismantle and if he'd seen such extensive rot it would be a certain fail. Anything affecting so much of the structure would have to be regarded as significantly weakening the structure as a whole, wherever it was situated.

If it's any consolation (it won't be) my MX 5 is showing a bit of front chassis rot that's similarly hidden by undertrays. I've slathered it in Waxoyl but my car isn't 35 years old so it's not had as long to fall apart.

On the bright side, it looks like a relatively simple structure to have remade and welded in.

RamboLambo

4,843 posts

170 months

Sunday 25th September 2016
quotequote all
Blimey I've not seen a 458 that bad for a while

simonr100

640 posts

117 months

Sunday 25th September 2016
quotequote all
really hope you get it sorted, that's a nasty surprise! give it another year and your car will look like this!

Edited by simonr100 on Monday 26th September 16:38

Gavc

225 posts

133 months

Friday 30th September 2016
quotequote all
having owned mine now for best part of 23 yrs, when W fully restored mine we found rust in the same place, though not as extensive as this. The water runs down from the radiator front bonnet vent and also the front to rear water pipes run near this area as well and sits under the here to rot out. I take my panels off and regularly check and re waxoyl this area. I notice on the video that 2 new water pipe hoses(blue) had been fitted, I wonder if anyone had looked in there then. at the front though there are 2 panels originally, though 1 usually does not get replace over the years which is the one for the water pipes. Also surprised the suspension lower A arms haven't pulled through on the chassis.
Great Under ratted cars and probably one of the best handling.Enjoy

Behemoth

2,105 posts

131 months

Friday 30th September 2016
quotequote all
Crikey. If it's a known pooling area, I'd think anyone thinking of purchasing these should take along the right sized spanner. Are there any drain holes where you could potentially poke a borescope camera?

I have a GTS & I don't know if it shares the same tubing as the GT4, but they are massively solid sections and look like they could hold up a house even after 40 odd years.

Kwackersaki

1,379 posts

228 months

Friday 30th September 2016
quotequote all
Behemoth, slight thread hijack but who do you use for your servicing and any repairs or bodywork if you've had any done?

I've just moved to the area.

Cheers

Behemoth

2,105 posts

131 months

Friday 30th September 2016
quotequote all
Shiltech Loughborough for mechanicals.

I haven't found a local bodyshop yet, but let me know if you come across sthg good. You'll likely have to steer them yourself on a 308 as I doubt anyone knows them well enough to get all the details spot on.

is-uk

1,478 posts

216 months

Friday 30th September 2016
quotequote all
You have one of the best bodyshops on your doorstep - Stallion at Beeston. Graham the owner has been working on Ferraris for the best part of 30 years and owns a 308 himself. He has done full restorations on four Dinos for me and also worked on cars for other people I know including other 246s and 308s. He knows the 308 and 246 inside out.

Here is a before and after comparison on one of my cars. It was a total basket case when I bought it with huge amounts of filler all over the car, none of the panels lining up, lots of hidden rust, total loss of the original factory bodyshaping etc. The photo hides a lot of this and tends to flatter it. Stallion did a bare metal restoration and put the car back to it's original colour of Verde Germoglio. Once it was finished it was photographed as part of a feature for Ferrari's official magazine.




Ilovejapcrap

3,281 posts

112 months

Friday 30th September 2016
quotequote all
I was on a body shop had a 550 having some paint, without the bumpers on all the little brackets etc had rust, more than just surface.on a few bits TBH


Not sure if they coat them that well ?

Behemoth

2,105 posts

131 months

Friday 30th September 2016
quotequote all
is-uk said:
You have one of the best bodyshops on your doorstep - Stallion at Beeston. Graham the owner has been working on Ferraris for the best part of 30 years and owns a 308 himself.
Great to know & I'll definitely look him up. At some point I'll repaint my 308, but for now I'm happy with its patina.

Kwackersaki

1,379 posts

228 months

Saturday 1st October 2016
quotequote all
Cheers is-uk, I'll have to take a trip out there. I have a small patch of rust that needs sorting but am considering a full re-spray.

Gavc

225 posts

133 months

Wednesday 5th October 2016
quotequote all
Yes, got to mention Stallion, his son has a F355 as well. Also Retford Autofinishers slightly more northeren do hugh amounts of Ferraris, Lambos, etc. They do alot for Nick Cartwright again they have been operating in this area for a long time. Mechanical Geoff at Shiltec great for the older cars , carb expert!! taught me a couple of trick and I thought I new the GT4 about as good as anyone, having restored my own and for owing it for so long, also being an engineer helps!! happy to offer advice where needed.

Blackpuddin

16,509 posts

205 months

Wednesday 5th October 2016
quotequote all
is-uk said:
You have one of the best bodyshops on your doorstep - Stallion at Beeston. Graham the owner has been working on Ferraris for the best part of 30 years and owns a 308 himself. He has done full restorations on four Dinos for me and also worked on cars for other people I know including other 246s and 308s. He knows the 308 and 246 inside out.

Here is a before and after comparison on one of my cars. It was a total basket case when I bought it with huge amounts of filler all over the car, none of the panels lining up, lots of hidden rust, total loss of the original factory bodyshaping etc. The photo hides a lot of this and tends to flatter it. Stallion did a bare metal restoration and put the car back to it's original colour of Verde Germoglio. Once it was finished it was photographed as part of a feature for Ferrari's official magazine.



That is a fabulous colour.

Kwackersaki

1,379 posts

228 months

Thursday 6th October 2016
quotequote all
Gavc said:
Yes, got to mention Stallion, his son has a F355 as well. Also Retford Autofinishers slightly more northeren do hugh amounts of Ferraris, Lambos, etc. They do alot for Nick Cartwright again they have been operating in this area for a long time. Mechanical Geoff at Shiltec great for the older cars , carb expert!! taught me a couple of trick and I thought I new the GT4 about as good as anyone, having restored my own and for owing it for so long, also being an engineer helps!! happy to offer advice where needed.
Thanks, I,ll check them out too.

torquespeak

234 posts

168 months

Thursday 27th October 2016
quotequote all
Caruso said:
Having recently spent a small fortune on bodywork restoration I was slightly horrified to find this when they took of the front undertray to do some suspension work.

Did you have a full inspection done *before* commissioning a bodywork restoration?

-Ed