996 GT3.2 discs and pads
Discussion
Steve Rance said:
If the Alcons are the same as the Brembo's, the initial purchase will include the mounting bells which are a considerable element of the cost. From then on only the discs themselves will need replacing. From my experience, if you are tracking the car regularly, the costs are almost half compared to running oem's
Agreed! IF.... You are paying OEM prices for OEM discs...
Have you looked at the price of the Zimmermans I listed above?
Don't forget Alcon/Brembo-style hubs and hardware don't last forever. They are prone to wear and ovalling of the mounting holes. They don't last forever.
Jack
And that's really what I was getting at. Consumable vs less consumable and it seems Jack and I have no problem with the braking performance on these oem type discs with more aggressive pads for track use. I think I will try these- if they work for Jack am sure they will work for me. Thanks everyone for thoughts and links.
I get more than 2-3 days out of a set of Zimmermans.
But then I'm not a race driver...
But yes, it is normally cracking around the holes that signals the death knell for the discs rather than wear. But still, if you use them right up to the Porsche recommended safe limit, they will do a lot more than 2-3 days being driven as hard as a "non racer" can achieve.
Jack
But then I'm not a race driver...
But yes, it is normally cracking around the holes that signals the death knell for the discs rather than wear. But still, if you use them right up to the Porsche recommended safe limit, they will do a lot more than 2-3 days being driven as hard as a "non racer" can achieve.
Jack
Possibly. But most novices don't get close to approaching the limits of the car both in terms of outright speed or under brakes, do they? Surely that in itself would contribute towards lower brake temps?
I honestly don't know. My assumption had always been the better your Laptimes, the more braking effort being used. I.E. Arriving at braking zones faster, braking later and harder = more heat generated.
I honestly don't know. My assumption had always been the better your Laptimes, the more braking effort being used. I.E. Arriving at braking zones faster, braking later and harder = more heat generated.
I wonder if I could get some help on this. I had Parr fit their floating disc setup on my Mk1 GT3 around 6 years ago. I've probably done 15000 miles on them, mostly road miles. I'm not the heaviest user but the brakes are brilliant. I've done a fair few road trips to the Alps and the brakes are fade free. The pads are still fine. However the rattle from the discs has got a lot worse over time to what is now I think too loud. What can be done about this - or do I need new discs/bells?
I've heard that the replacement ones are quieter but don't understand what needs replacing nor approximate cost.
Would appreciate any pointers.
Cheers
I've heard that the replacement ones are quieter but don't understand what needs replacing nor approximate cost.
Would appreciate any pointers.
Cheers
Singh911 said:
I wonder if I could get some help on this. I had Parr fit their floating disc setup on my Mk1 GT3 around 6 years ago. I've probably done 15000 miles on them, mostly road miles. I'm not the heaviest user but the brakes are brilliant. I've done a fair few road trips to the Alps and the brakes are fade free. The pads are still fine. However the rattle from the discs has got a lot worse over time to what is now I think too loud. What can be done about this - or do I need new discs/bells?
I've heard that the replacement ones are quieter but don't understand what needs replacing nor approximate cost.
Would appreciate any pointers.
Cheers
The slots on the periphery of the bells wear, as do the bobbins that run in them (the two parts slide together to allow the discs to expand and contract independantly of the bell), they'll need removing stripping and measuring to establish if they've reached their wear limits. On the basis of the mileage and age you've mentioned, it's quite likely the bobbins and bells may need replacing. Depending on the materials they're manufactured from, one component out the two maybe sacrificial, you'd hope it would be the bobbins ....... !I've heard that the replacement ones are quieter but don't understand what needs replacing nor approximate cost.
Would appreciate any pointers.
Cheers
I suspect you've got the Brembo discs/bells ? They were the intrinsically race parts which were modified for road/trackday use, and as such were known to be a noisy. The likes of Alcon and PFC went to greater lengths to ensure the disc mounting hardware operated more silently.
Edit to add image (open it in Thumbsnap to view a larger image) :
1 is the bell
2 is the disc
3 is the bobbin (not the mounting bolt in the middle)
4 is the mounting bolt.
The bobbin (3) bolted to the disc (2) is free to move independently of the bell (1), it slides in a slot machined into the periphery of the bell (deliniated by the two parallel yellow lines) where these two parts touch (the sides of the slot and the faces of the bobbin) wear will occur, and when it does you get the rattle/noise you describe.
Edited by Slippydiff on Sunday 25th January 10:47
To add - thanks to Jack's German supplier link I have just ordered new F&R discs and Pagid RS29 / 19 pad combo for £1000 delivered inc taxes. Which seems jolly good value to me. I will update the thread once fitted and in service as to wear / effectiveness. Thank you to all for advice and ideas.
Harris_I said:
Personally I do not recommend spending much on cooling ducts unless money is no object. Existing cooling on 996 GT3.2 is adequate under race conditions.
On the front I never had a problem. But the rears have no cooling ducting at all as standard. My car used to get really grumbly at the back on track and pick up a lot of vibration. This may be due to the RS14 pads, I'm not sure, but regardless, since fitting the ducts I have had zero issues. The 996 TT caliper ducts are pennies. The 996 GT2 disc ducts are about £60+vat per side. Hardly a fortune in the GT3 scheme of things.
Here are the part numbers for the 996 GT2 ducts. I'm sure you can get them from FVD. Mike at Sports and Classic got mine for me.
Jack
Hi Nick,
997 TT caliper ducts
997 GT3 front ducts
And what I have at the front on mine. I didn't bother upgrading the fronts on mine to the 997 GT3 items as the ones that are on there seem bigger. But I'm not sure if they are original standard items or if Hunter66 (first owner) upgraded them.
Hope that helps.
Jack
PS the rear 997 TT caliper ducts so need to be trimmed very slightly (I used a craft knife) where they come up against the tyre. Otherwise they rub the tyre and make a noise. I put the wheel on, drove it 5 yards, took the wheel off and trimmed away where the contact was. Really easy.
997 TT caliper ducts
997 GT3 front ducts
And what I have at the front on mine. I didn't bother upgrading the fronts on mine to the 997 GT3 items as the ones that are on there seem bigger. But I'm not sure if they are original standard items or if Hunter66 (first owner) upgraded them.
Hope that helps.
Jack
PS the rear 997 TT caliper ducts so need to be trimmed very slightly (I used a craft knife) where they come up against the tyre. Otherwise they rub the tyre and make a noise. I put the wheel on, drove it 5 yards, took the wheel off and trimmed away where the contact was. Really easy.
Gassing Station | 911/Carrera GT | Top of Page | What's New | My Stuff