Cayman R - owners/buyers/mods

[Dan911]

With the other topic now over run..

Keep it clear on topics.

Dan

[PR36]

hi all, i was thinking of putting nitrogen in the tires, does anyone know how much extra hp this will give me. Ps i would appreciate if only owners who have done this mod would post their experience. Thanks.

[Dan911]

A few things from the original topic -

Bolster cover(s)
WEBDUNK
Duncan came across your post on the bolsters could you send me details and cost to me please best use
[e-mail] email contact
Brian
Boxster Spyder

Race exhaust
http://www.cargraphicts.com/en/products/exhaust-sy...

[Beanoir]

If we have some details on the bolster covers can we post them on here? Cost, shipping etc would be great.

[Webdunk]

Beanoir said:

If we have some details on the bolster covers can we post them on here? Cost, shipping etc would be great.

I think I got back to everyone who asked with the details of the US based seller. I've let him know there's been forum interest too so perhaps he will post up with details.

[V800MJH]

I'd like to know about these too please

[Sarnie]

I didn't get a mail

[PorscheGT4]

nor me.

[Sarnie]

PorscheGT4 said:

nor me.

You were too busy fighting about spongey pedals

[Dan911]

Does anyone know if I fit 5mm spacers, will I need longer bolts? (front spacers)

[Webdunk]

3 mails sent

[Dan911]

Webdunk said:

3 mails sent

Me too please..

[V800MJH]

Do I just need to email that guy for any information?

Or is there more to hand, like price etc.

Be good to get some photos up in here too.

Does anyone fancy organising a group buy

[PorscheGT4]

Dan911 said:

Does anyone know if I fit 5mm spacers, will I need longer bolts? (front spacers)

I would say yes, Porsche also do a 5mm longer locking wheel bolt.

[Webdunk]

V800MJH said:

Do I just need to email that guy for any information?

Yup. He's just a private individual, making these in his spare time. I googled originally which took me to Rennlist which has more photos.

My photo :

[V800MJH]

Webdunk said:

Yup. He's just a private individual, making these in his spare time. I googled originally which took me to Rennlist which has more photos.

My photo :

Thanks mate.

Do you have any other photos from other angles? Especially the fixing points..

Be good to get them up in here for everyone to see too.

[Webdunk]

V800MJH said:

Do you have any other photos from other angles? Especially the fixing points.

I don't yet. Looking at the image I've posted :

- to the right is a complete loop of the protector, velcro'd through the gap in the seat that the seatbelt passes thro.
- to the left there are 2 points of attachment
-- the main one is a long leg of material which velcros under the seat pad, which itself then velcros on top so pretty solid
-- the secondary one is a simple elastic through eyelet pretty much as you see, fed through the gaps in the seat rails

[V800MJH]

Cheers,

By the way that email you sent me doesn't work... ?

I just tried to send him a mail.

[Beanoir]

My other half reckons she could make these without any problems, given she upholsters chairs and such like as a hobby this is a fairly simple procedure.

I may look into, if I can get the pattern or at least dimensions what it would take to make a batch of these for us in the UK.

[Axel987]

This is the version with 2,5 inch. Far enough for a 3.4 liter engine. If you want to upgrade to a 3.8 liter engine later I suggest to go for the 2.75 inch version.

M&M ( Manthey) are 100% handcrafted, compared to Cargraphic which is factorywelded with machines. M&M Gives more power according to Jens in Ehresmann. They also supply the tubing for the Porsche Motorsport division ( not everyone knows this).

200 Cell HJS Cats. Regarding 82 mm plenum and Throttlebody, I forwarded MrDemons thoughts of it not being necessary - and with the new exhaust and manifolds it gives gains for sure. the 991 3.4 has 82 mm plenum btw

Also thinking about the 997.2 GT3 shortshift kit, as well as a sports air filter. as the german said, more air is always good!