Rubber weather strip for Diablo

[Diablo SV]

I see quite a few SE30,s have these on the front bumper , has anyone here fitted one to an SV ? Anyone knows if it,s possible given the different bumper ?

http://www.eurospares.co.uk/searchResult_one.asp?M...

[Sudesh]

I have a brand new one sitting in my garage, that I haven't got round to fitting on my SE bumper. From memory it has to be screwed up into the bumper with a load of tiny screws. I'll have a look when I get home.

As for fitting the SV, it may be possible as they look quite similar around that lower edge, there is a tiny bit of flex in the lip spoiler too.

[Diablo SV]

Sudesh said:

I have a brand new one sitting in my garage, that I haven't got round to fitting on my SE bumper. From memory it has to be screwed up into the bumper with a load of tiny screws. I'll have a look when I get home.

As for fitting the SV, it may be possible as they look quite similar around that lower edge, there is a tiny bit of flex in the lip spoiler too.

Thanks Sudesh , looking at the se30 bumper compared to the SV it has a thicker lip so I,m not sure if the rubber will be too big , if so maybe the rubber could be trimmed or cut back . Hard to tell without having one at hand . I,d like to fit one if possible , I think they do help protect the bumper on leading edge .

[Sudesh]

Its possible it could be trimmed along the lower edge, but the spoiler itself is recessed where it bolts to the bumper, so nothing could be taken off there.


Hers some pics

[Diablo SV]

Thanks for the pic,s Sudesh , so how tall is the rubber itself , looks about 15mm ?

[Sudesh]

I'll measure it shortly and let you know

[Diablo SV]

Ok thanks Sudesh , I,ve got 24mm from the bottom of the bumper to where it starts to roll over for the intakes .

Oh crap , no good at photography !

[Sudesh]

The SE lip spoiler is 29mm.