Murci wiper blades
Discussion
Voicey.
The fitting has been the issue so far.
The standard blade fitting (the plastic block bit) is normally about 10mm wide, this one is almost double that. I went through several boxes at Halfords to find a match, but none the right fitting or length - About 28inches with a spoiler.
This morning I did manage to find reference to a Merc CL 2005 year that might be the same, will have a look on the way home.
del
The fitting has been the issue so far.
The standard blade fitting (the plastic block bit) is normally about 10mm wide, this one is almost double that. I went through several boxes at Halfords to find a match, but none the right fitting or length - About 28inches with a spoiler.
This morning I did manage to find reference to a Merc CL 2005 year that might be the same, will have a look on the way home.
del
del mar said:
Voicey.
The fitting has been the issue so far.
The standard blade fitting (the plastic block bit) is normally about 10mm wide, this one is almost double that. I went through several boxes at Halfords to find a match, but none the right fitting or length - About 28inches with a spoiler.
This morning I did manage to find reference to a Merc CL 2005 year that might be the same, will have a look on the way home.
del
Post a pic up - someone might recognise it. My A8 has got a really strange fitting that took ages to cross reference - Audi wanted £60 for the pair!The fitting has been the issue so far.
The standard blade fitting (the plastic block bit) is normally about 10mm wide, this one is almost double that. I went through several boxes at Halfords to find a match, but none the right fitting or length - About 28inches with a spoiler.
This morning I did manage to find reference to a Merc CL 2005 year that might be the same, will have a look on the way home.
del
I have found them !
The original Mk 1 Galaxy / Sharan / Seat Alhambra ones fit.
They are only sold in a twin pack which will give you a 28inch one and another smaller one, but should be easier to find.
I am semi confident the blades from the 640 are a different fit and easier to find.
Del
The original Mk 1 Galaxy / Sharan / Seat Alhambra ones fit.
They are only sold in a twin pack which will give you a 28inch one and another smaller one, but should be easier to find.
I am semi confident the blades from the 640 are a different fit and easier to find.
Del
del mar said:
I have found them !
The original Mk 1 Galaxy / Sharan / Seat Alhambra ones fit.
They are only sold in a twin pack which will give you a 28inch one and another smaller one, but should be easier to find.
I am semi confident the blades from the 640 are a different fit and easier to find.
Del
So Del, for a right hand drive 6.2 should we buy the early VW Sharan blades then?The original Mk 1 Galaxy / Sharan / Seat Alhambra ones fit.
They are only sold in a twin pack which will give you a 28inch one and another smaller one, but should be easier to find.
I am semi confident the blades from the 640 are a different fit and easier to find.
Del
Morning,
Yes.
The issue is the width of the arm on the car, most cars have a "thin" arm, the one on the early Murci is a couple of mm thicker - limiting your choice of blade.
The original Galaxy ones do fit, and the Audi code on mine "googled" as an early Audi A2.
However despite all of that....
Sevenoaks only wanted £16.
Del
Yes.
The issue is the width of the arm on the car, most cars have a "thin" arm, the one on the early Murci is a couple of mm thicker - limiting your choice of blade.
The original Galaxy ones do fit, and the Audi code on mine "googled" as an early Audi A2.
However despite all of that....
Sevenoaks only wanted £16.
Del
Gassing Station | Diablo/Murcielago/Aventador | Top of Page | What's New | My Stuff