Ally fuel tank outlet thread size...

[Pupp]

Anyone know the thread spec of the outlet bung? Want to blank off as going to an in-boot swirl pot and lifter pump etc so modding a tank to put the plumbing on the other side (yep, I could get it welded)

[Steve_D]

Would be easier to drill out the output spigot and thread tap for a blanking bung.

Steve

[Discopotatoes]

I cut the spigot off and welded an an8 boss on so I can utilise the I tank filter, the used a 180deg ultra flow an8 fitting to bring it back into the boot.

Edited by Discopotatoes on Friday 24th February 22:48

[Pupp]

Not sure it has a filter (know some do) so will pop it out and check but still wrong side and the set up im contemplating has two pumps with dedicated strainers plus a decent in line filter..

[Hoofa]

Yep another weld on -8 adapter, I went with the new fuel tank approach with intank fuel pump and swirl pot