Engine finally ready for Dyno test
Discussion
Thanks Terry, For all the hard work and late nights, Really looking forward to having the first road test, graphs don't mean much to me, don't really understand them, I will probably want to fine tune those figs, to maps that will personally suit me.
Can't wait to see what this beast is going to drive like.
Can't wait to see what this beast is going to drive like.
We were holding back the torque on all the maps, the best torque fig was 561ftlb with 703bhp but at this point it kept blowing the spark out, Terry thinks its capable of 720bhp 600ftlb but we need to change the plugs to a new type, can't remember the term he used for the plugs.
We will be booking a day on the rolling road to set the maps to my personal choice, which will be as Andy said keeping the torque higher on certain maps, and reducing it on others, all the maps done so far are the starting points.
It's also a great testament to the engine which was built by Dave Jetstreem, and Mountune who done the final re build with all the new engine upgrades and turbos.
The new work is being done at Bespoke by Skip, for me they are closer, but I am more than happy to have either work on my car as they are both top draw.
We will be booking a day on the rolling road to set the maps to my personal choice, which will be as Andy said keeping the torque higher on certain maps, and reducing it on others, all the maps done so far are the starting points.
It's also a great testament to the engine which was built by Dave Jetstreem, and Mountune who done the final re build with all the new engine upgrades and turbos.
The new work is being done at Bespoke by Skip, for me they are closer, but I am more than happy to have either work on my car as they are both top draw.
Edited by sundance002 on Tuesday 25th September 15:29
Gadgeroonie said:
I have customers up and down the country - but probably easiest to meet you near Heathrow
Ok I will have to speak with Terry and see what his plans are? but I would think it will take most of the day to finish the maps.I'm not back in the uk for a couple wks so will get back to you, thanks again for the offer.
GTO600 said:
Looks like gearbox oil cooler.
It's the oil cooler, originally it was mounted at the front, which we thought was to far to work properly, and now doesn't take any space in the tunnel. this is a new type, which is supposed to be a lot more effective.. The gearbox cooler will be mounted in the other side pod.Skip at Bespoke is doing all the work, and his very good, extremely tidy, and very thorough.
Edited by sundance002 on Tuesday 2nd October 12:17
GTO600 said:
andygtt said:
GTO600 said:
Craig, assume that's a knock sensor to the right of the oil filter, will it work there ?
What do you think of my fuel tank ?
Jag put it in the centre of the v between the headsWhat do you think of my fuel tank ?
Gassing Station | Noble | Top of Page | What's New | My Stuff