Discussion
Thanks Andy - do you have vents molded into the rear clam?
Also its hard to see on the pic, but is the rear clam still the same dimensions at the end as it looks more curved on the bottom edge or is that the diffuser showing?
also andy are comps the same ones Tux runs? If so ive already got those. However I need to do speedlines - so up to you. :-)
Also its hard to see on the pic, but is the rear clam still the same dimensions at the end as it looks more curved on the bottom edge or is that the diffuser showing?
also andy are comps the same ones Tux runs? If so ive already got those. However I need to do speedlines - so up to you. :-)
Edited by stevegto3 on Thursday 18th September 22:08
stevegto3 said:
Thanks Andy - do you have vents molded into the rear clam?
Also its hard to see on the pic, but is the rear clam still the same dimensions at the end as it looks more curved on the bottom edge or is that the diffuser showing?
also andy are comps the same ones Tux runs? If so ive already got those. However I need to do speedlines - so up to you. :-)
My rear clam is more curved at the back as it doesn't have the outward lip by the exhaust tips, the vents are moulded in... Also intercooler scoop is higher and slightly visible from the side I guess.Also its hard to see on the pic, but is the rear clam still the same dimensions at the end as it looks more curved on the bottom edge or is that the diffuser showing?
also andy are comps the same ones Tux runs? If so ive already got those. However I need to do speedlines - so up to you. :-)
Edited by stevegto3 on Thursday 18th September 22:08
The comps are same as tux's, just mine are black centres with light grey outer rim... The speed lines tend to be my road rims, comps track.
Cheers Jed that would be very useful, as its one less wheel to outline!
Once i have that yours is next!!
hope things are good stateside :-)
Once i have that yours is next!!
hope things are good stateside :-)
JW027 said:
Hey Steve,
These are looking great don't forget mine I'll send Annah an E-mail to send you over the the AI for the speedlines as we discussed. Hopefully this will save you some time!
Looking forward to seeing more
These are looking great don't forget mine I'll send Annah an E-mail to send you over the the AI for the speedlines as we discussed. Hopefully this will save you some time!
Looking forward to seeing more
Hi Andrew
is your standard m400 wheels in silver? Monza red? Splitter carbon?
Basically this started as a personal project to create and draw a huge A1 poster of as many different variations of the M12 that I can - thought it could look cool. As Andygtt said, its surprising with the same body shape how many individual Nobles there are.
It turns out quite alot of people like it, so im considering selling a limited run, possibly framed or unframed depending on cost.
Likewise if individuals want a drawing and print of their car then I might be able to do that too, again for a cost.
At the moment im drawing as many as I can and then see where we from from there.
Steve
is your standard m400 wheels in silver? Monza red? Splitter carbon?
Basically this started as a personal project to create and draw a huge A1 poster of as many different variations of the M12 that I can - thought it could look cool. As Andygtt said, its surprising with the same body shape how many individual Nobles there are.
It turns out quite alot of people like it, so im considering selling a limited run, possibly framed or unframed depending on cost.
Likewise if individuals want a drawing and print of their car then I might be able to do that too, again for a cost.
At the moment im drawing as many as I can and then see where we from from there.
Steve
Steve,
that looks really good, a couple of small tweaks though, the wheels, mirrors, wing end plates and wing pylons are all in anthracite, the same colour as the Speedline wheels in the picture above.
how much would it cost for a personal A3 print and a larger group print?
Thanks
Andrew
that looks really good, a couple of small tweaks though, the wheels, mirrors, wing end plates and wing pylons are all in anthracite, the same colour as the Speedline wheels in the picture above.
how much would it cost for a personal A3 print and a larger group print?
Thanks
Andrew
Hi guys
Andrew, no problem, its just a first draft.
Regarding selling these, not sure costs yet. Im want to get the group one done and then offer it as a limited print. As far a individual cars for people, again id be happy to do it, just need to cover my time and printing.
Ill keep you all posted once the group is complete.
Thanks for all the positive comments!
Steve
Andrew, no problem, its just a first draft.
Regarding selling these, not sure costs yet. Im want to get the group one done and then offer it as a limited print. As far a individual cars for people, again id be happy to do it, just need to cover my time and printing.
Ill keep you all posted once the group is complete.
Thanks for all the positive comments!
Steve
Gassing Station | Noble | Top of Page | What's New | My Stuff