3d Cad file for Noble ?

[mgbond]

JW027 said:

Hi guys,
So I have completed the V1 model of the stone guards. I have upped the thickness from a vac formed 1.2mm (thickest) plastic to 2.5mm (uniform thickness) black resin which seems tougher. I guess these are consumables.



Hopefully someone local to Redhill would be able to help me check the fit once they are 3D printed.(I have carbon bits on mine that I can't be arsed to remove and refit).

Redhill locals let me know!

Have some grooved areas on the inside as they get glued on and a keyed surface would be good.

[mgbond]

JW027 said:

Hi guys,
So I have completed the V1 model of the stone guards. I have upped the thickness from a vac formed 1.2mm (thickest) plastic to 2.5mm (uniform thickness) black resin which seems tougher. I guess these are consumables.



Hopefully someone local to Redhill would be able to help me check the fit once they are 3D printed.(I have carbon bits on mine that I can't be arsed to remove and refit).

Redhill locals let me know!

Have some grooved areas on the inside as they get glued on and a keyed surface would be good.

[Quantum Steve]

Not that local but they are exactly what I have been looking for, happy to test / buy a set....cheers, Steve

[Nailgundan]

Jed,
I live in the aforementioned hole, and have more spare time than I care for so more than happy to assist.

Drop me a PM to arrange.
Dan

JW027 said:

Hi guys,
So I have completed the V1 model of the stone guards. I have upped the thickness from a vac formed 1.2mm (thickest) plastic to 2.5mm (uniform thickness) black resin which seems tougher. I guess these are consumables.



Hopefully someone local to Redhill would be able to help me check the fit once they are 3D printed.(I have carbon bits on mine that I can't be arsed to remove and refit).

Redhill locals let me know!

[JW027]

V3 render below. After the test fit I have added Bondys Keyed surface and reduced the wall thickness of the sides to improve the fit & reduced the amount of resin required. This is in a print queue now I'll post an update later...

[mgbond]

JW027 said:

V3 render below. After the test fit I have added Bondys Keyed surface and reduced the wall thickness of the sides to improve the fit & reduced the amount of resin required. This is in a print queue now I'll post an update later...

Nice work. Shame I've just had all my spare ones carbons dipped. Lol

I'll still have some though

[searsy]

I knew I'd been missing something, they look superb Jed, I missed the key heads as well didn't I..

[patsrocket]

Are these going to be made?

[JW027]

Hi Pat I have a final print round to make then I'll get them on my car for a while to ensure they don't fall apart on the first drive then I'll get them in production.

I'm very time poor at the moment so hopefully I'll get around to this in the next few weeks.

[patsrocket]

Awesome JW,Thanks!