V6 essex tuning
Discussion
Wrong John, , I meant the one GAjon posted. I would presume yours is even larger as it's on a full on race engine?
We've got some tubular SS manifolds for the Taimar, they are 1.5" OD. Trying to determine if they are just standard copies of the TVR item but in SS or something else. The primaries are certainly not equal length, and the join at the collector looks a bit naff, .
We've got some tubular SS manifolds for the Taimar, they are 1.5" OD. Trying to determine if they are just standard copies of the TVR item but in SS or something else. The primaries are certainly not equal length, and the join at the collector looks a bit naff, .
tvrski said:
do you have some pictures of the manifold, while mounted?
I haven't any with body on that are of any use really, hope hese help.
If you copy the image and paste it onto your PC, you can then zoom in on it for more detail. ( I didn't know you could do that till I just tried it)
Edited by GAjon on Wednesday 9th May 23:01
Edited by GAjon on Wednesday 9th May 23:01
I have a source of new 44mm twin choke carbs based on the 44DCNF Weber. The baseplate footprint will fit the 38DGAS manifold which would just need to be opened out to port match. I have had good results with this on the 3.0 litre V8 Triumph Stag engine which was running a 38DGMS but really pulls more strongly with the 44DCNF. So I am sure the 3L Essex should also benefit from more power.
Edited by V Mad on Tuesday 3rd December 19:52
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff