3000s windowframes
Discussion
they look like the Bees Knees very good.
On my 3000S i already have stainless side screens. At the top front of the channel in the corner there are 2 pop rivets which i had to drill out so i could lift the channel to replace the felt runners .
Do your's have 2 pop rivets like this to enable fitting of felt runners and glass
Alan
On my 3000S i already have stainless side screens. At the top front of the channel in the corner there are 2 pop rivets which i had to drill out so i could lift the channel to replace the felt runners .
Do your's have 2 pop rivets like this to enable fitting of felt runners and glass
Alan
Rudy,
imho i think the pop rivets on mine look very neat and there is the bonus that they cannot come loose with the bad vibrationsthey are high quality from when i worked in the Aerospace industry.
What have you planned for the seals to go along the bottom edges to protect the paintwork.
I have seals and they work very well and i can take a few photos of them if you like.
imho i think the pop rivets on mine look very neat and there is the bonus that they cannot come loose with the bad vibrationsthey are high quality from when i worked in the Aerospace industry.
What have you planned for the seals to go along the bottom edges to protect the paintwork.
I have seals and they work very well and i can take a few photos of them if you like.
Edited by plasticpig72 on Friday 21st November 06:50
Edited by plasticpig72 on Friday 21st November 06:51
Hansoplast said:
Very very nice.
I like people who can make good things with their hands (after they have been thinking first of course).
I know a car without the window frames.
Should go and look (and buy) it.
Keep the good work going Rudy.
Hans
Hans,I like people who can make good things with their hands (after they have been thinking first of course).
I know a car without the window frames.
Should go and look (and buy) it.
Keep the good work going Rudy.
Hans
you mean the silver 3000m,converted to a 3000s?
R
Hey
To upgrade an old thread
This could be the next project,anyone knows where to find a Jenssn Healey windowframe?
they where used(modified) to fit the 3000s,as there is some need in replacements(rust?)I would like to start rebuilding a few ,
cheers
Rudy
To upgrade an old thread
This could be the next project,anyone knows where to find a Jenssn Healey windowframe?
they where used(modified) to fit the 3000s,as there is some need in replacements(rust?)I would like to start rebuilding a few ,
cheers
Rudy
Edited by tunepipe911 on Thursday 8th December 20:18
It would be nice to find a source for the Early Mini Window Catches in METAL instead of PLASTIC for a reasonable price. The plastic ones are sooo fragile.
If the Window Frames are remade i think they need built in deflecters to stop rain coming inside. Between the end of Frame and the Sidescreens.
Alan
If the Window Frames are remade i think they need built in deflecters to stop rain coming inside. Between the end of Frame and the Sidescreens.
Alan
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff