Vixen/Tuscan Seats
Discussion
Having acquired one original low back seat I need to make a copy. The seat I have is in good condition so am a tad reluctant to take it apart to make a mould and get them both re-trimmed. Does anyone have a mould or another low back seat that they want to part with?
This is the type of seat fitted to my car:
.
I'm also looking for the paint code for the Dark Green used on early Vixens I believe the original TVR name was either Sherwood Green or Aquatic Jade.
thanks in advance
Matt
This is the type of seat fitted to my car:
.
I'm also looking for the paint code for the Dark Green used on early Vixens I believe the original TVR name was either Sherwood Green or Aquatic Jade.
thanks in advance
Matt
I posted the colour chart in this thread:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Aquatic Jade Glasso Ref 27006/M
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Aquatic Jade Glasso Ref 27006/M
Edited by alphaone on Thursday 16th October 13:03
Andrew, I emailed you about your seats, but missed out on them as you had already sold them. Thought they were £600 fully re-trimmed, not that it makes any difference now.
Interested who the little birdie is as not much progress apart from gathering parts and info re paint codes etc. I have now managed to get the engine running (having rebuilt the carbs) and it is showing good compression. Shouldn't need anything else apart from a good clean, flush of the waterways and fresh oil etc. Still need to identify brake master cylinder as the piston is totally seized.
Matt
Interested who the little birdie is as not much progress apart from gathering parts and info re paint codes etc. I have now managed to get the engine running (having rebuilt the carbs) and it is showing good compression. Shouldn't need anything else apart from a good clean, flush of the waterways and fresh oil etc. Still need to identify brake master cylinder as the piston is totally seized.
Matt
Matt said:
Andrew, I emailed you about your seats, but missed out on them as you had already sold them. Thought they were £600 fully re-trimmed, not that it makes any difference now.
Interested who the little birdie is as not much progress apart from gathering parts and info re paint codes etc. I have now managed to get the engine running (having rebuilt the carbs) and it is showing good compression. Shouldn't need anything else apart from a good clean, flush of the waterways and fresh oil etc. Still need to identify brake master cylinder as the piston is totally seized.
Matt
That included shipping Mat so yes your right sorry i forgot you rang as there where a number of calls Davids seats may be the answer or Ian Banister has a Mold and he may be able to make one for you i am so looking forward to seeing her finished and hopefully re create that iconic picture of your car Interested who the little birdie is as not much progress apart from gathering parts and info re paint codes etc. I have now managed to get the engine running (having rebuilt the carbs) and it is showing good compression. Shouldn't need anything else apart from a good clean, flush of the waterways and fresh oil etc. Still need to identify brake master cylinder as the piston is totally seized.
Matt
A
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff