Vixen/early M, Arrow switches..

[Adrian@]

Does anyone know the 'THEN' Arrow part numbers for the washer switch (M series 15943)....I can see the Vixen listing for 92P-102-11E (M series 15942) for the two speed wipers, 92P404-11E for the 5 single switches (M series 15949) , but I have never seen a part number attributed to the sprung return washer switch (there are no numbers on the switches I have OR any that I have seen in the past).
I am also looking for the Arrow versions (Arrow numbers and the actual items) of the hazard switch (M series 15944) and the SPLIT rocker HRW and heater fan switch M series 15952) and headlamp/side (15950), IF anyone has dreams of updating these early M switches I am looking for these for samples to copy.
Adrian@



TVR/Arrow switch available in all versions

Edited by Adrian@ on Sunday 23 November 07:31

[griff 200]

I have got two ,std m dash from a 73 1600m and a dash from a 74 3000m. You can have it all if you like ? Richard

[Hansoplast]

Hi
Does anybody have the wiring scheme to this switch?
To many ( 5 wires) to find out by trial and arrow.
I do know that the double spade is for power. But why a double spade?

Hope someone can help.

Hans

[Dollyman1850]

Hansoplast said:

Hi
Does anybody have the wiring scheme to this switch?
To many ( 5 wires) to find out by trial and arrow.
I do know that the double spade is for power. But why a double spade?

Hope someone can help.

Hans

I am sure I posted a pic of this before??







These any help?

[ATE399J]

Two power wires are needed as one is for normal operation and the other for the 'self park' action.
l had the same problem, search on here for "I can't park mine" for a wiring diagram.

[Hansoplast]

Thanx for the info.
Used the search button from PH but did not find the pics. Only this topic.

Will try it today so another item from the to do list.
The yellow wire is unfamiliar in my car but when it is only one wire than it will lead to another color isn't it?

Hans

[Hansoplast]

Well the wiper works with 2 speeds.
But the auto stop doesn't work.
Possibly the wheel in the wiper engine is not correctly positioned in relation with the stop. (sorry for this horrible english)

The wire colors to the motor are correct but not to the switch.
As I said I am missing the yellow ( is not on the other end either!!!)

But on the switch they are on other positions than as shown on the pictures????
Do not know why.

Try again tomorrow to solve the auto stop.

Hans