Interior dimensions Vixen S1 wanted

[Sonus]

Who has got a stripped out Vixen S1 body available? I am in need for some measurements of the top of the transmission tunnel as mine is missing and I need to redo it.

[Astacus]

I can get you what you need . Let me know the exact dimensions you need to know. Can you post a photo of the tunnel as it is now?

Edited by Astacus on Friday 13th January 09:03

[Sonus]

I would appreciate the following dimensions;

1. Width of bulge at bulkhead
2. Height of bulge at bulkhead
3. Distanse across from one side to the other of the bulge at bulkhead
4. Length of bulge from bulkhead and backwards
5. Widt of flat side section either side of the bulge.
6. Dimensions to locate position of handbrake lever hole - width, length and distance from transmission side



Does that make sence?

[anonymous-user]

I replied with a photo on FB I believe, you'll be lucky to get another cars dimensions to fit yours though!
I have a centre console board ready for trimming but the handbrake and gearstick cutouts are tailored to each car as it depends on the exact position of the body on the chassis etc. I can give you the dimensions but they wont mean much!

[Sonus]

Yes I am aware they will all be a bit different, but some measurements would get me in the ballpark atleast
As you know there is not much left of the original transmisson tunnel top in my car

[anonymous-user]

From your photos there's enough to take 'site dimensions'? Or not?

[Sonus]

There is not much left, but I do have approx. 5cm each side of the hole. It starts right at the bulkhead and ends up 20cm behind the handbrake when it is on.