M series quick release hinges

M series quick release hinges

Author
Discussion

plasticpig72

Original Poster:

1,647 posts

148 months

Wednesday 1st February 2017
quotequote all
I have contacted the usual places: DG don't stock them and Adrian prefers not to supply as considered too difficult for diy.
I wondered if someone has a pair which they would consider parting with.
If not i will get some made but it would be easier to find some for sale.
I already have quick release hinges on my 3000S which work very well.
Alan

Adrian@

4,290 posts

281 months

Wednesday 1st February 2017
quotequote all
plasticpig72 said:
I have contacted the usual places: DG don't stock them and Adrian prefers not to supply as considered too difficult for diy.
I wondered if someone has a pair which they would consider parting with.
If not i will get some made but it would be easier to find some for sale.
I already have quick release hinges on my 3000S which work very well.
Alan
Alan, re your comment on DIY this is not the case, I sell these to people that I discern (in either speaking to them or reading their posts/seeing their work) are prepared to read the instructions on how to fit the kit/contact me at the point that they are unsure of a way forward (rather than post on line where it is guess work that I read the post.. today I had a customer post who has a kit they fitted) as if fitted incorrectly these will load the bonnet pin system and the bonnet will pop whilst driving.
Adrian@

plasticpig72

Original Poster:

1,647 posts

148 months

Wednesday 1st February 2017
quotequote all
Adrian,
I understand your position 100% no problem.
Imho i thought it better to mention i have already tried the normal contacts, otherwise people will suggest contact you or DG.
So has someone got a pair of Quick release hinges for sale PLEASE.
I am a retired Engineer and can adjust things correctly.
I was in the Aerospace Industry at Marconi Space and Defence Systems Portsmouth as QC Engineer. We always had specifications and build procedures to follow.
Many thanks in advance
Alan

Edited by plasticpig72 on Wednesday 1st February 17:14

Andrew Gray

4,969 posts

148 months

Wednesday 1st February 2017
quotequote all
Adrian@ said:
plasticpig72 said:
I have contacted the usual places: DG don't stock them and Adrian prefers not to supply as considered too difficult for diy.
I wondered if someone has a pair which they would consider parting with.
If not i will get some made but it would be easier to find some for sale.
I already have quick release hinges on my 3000S which work very well.
Alan
Alan, re your comment on DIY this is not the case, I sell these to people that I discern (in either speaking to them or reading their posts/seeing their work) are prepared to read the instructions on how to fit the kit/contact me at the point that they are unsure of a way forward (rather than post on line where it is guess work that I read the post.. today I had a customer post who has a kit they fitted) as if fitted incorrectly these will load the bonnet pin system and the bonnet will pop whilst driving.
Adrian@
I believe at one point Alan there where several versions going around as the ones that are on my 3000S are different to the ones you supplied for my Brothers Taimar.
Andrew

plasticpig72

Original Poster:

1,647 posts

148 months

Thursday 9th February 2017
quotequote all
I just looked on Adrian's face book and the quick release hinges do look very nice.
Alan

phazed

21,844 posts

203 months

Thursday 9th February 2017
quotequote all
You could ask Verpoorten Technik to make up a pair. They did these for my Chimaera and now market them.

http://vtautomotive.com/shop/tvr/cerbera-s6/tvr-ce...

plasticpig72

Original Poster:

1,647 posts

148 months

Friday 10th February 2017
quotequote all
This is my sketch to mod hinges to quick release

Maybe this can help someone
Alan

phillpot

17,105 posts

182 months

Friday 10th February 2017
quotequote all

Just curious, why do you want QR hinges?

Can see benefits if you're going racing but for a road car scratchchin

AMTony

1,074 posts

166 months

Friday 10th February 2017
quotequote all
I had these years ago on my 3000S and if memory serves me right younwill need one part to have a threaded end for adjustment.

You also need to fit a wiring connector so as to be able to remove bonnet easily.

I remember that it was one of the most useful mods to my car as it gave completely unhindered access to the engine bay.

phillpot

17,105 posts

182 months

Friday 10th February 2017
quotequote all

"Wide open" hinge mod...... clicky gives ample access for all but major surgery.

I have a trailer plug for electrics and it's just two bolts if I do want it right off smile

plasticpig72

Original Poster:

1,647 posts

148 months

Friday 10th February 2017
quotequote all
Why do i want QR Hinges.
Why not rolleyes, i have them on my 3000S and find them very handy.
Very easy mod even for DIY.
On my 3000S i also have a 5 speed gearbox which is also very nice but requires a lot more work to fit.
If or when i need to replace bullet connectors in the Wiring Harness or remove the Rad in comfort or relaminate around the frame that supports the Bonnet.
Imho this is exactly right.
I got the info from "M FIX" on the web many thanks, which has imho lots of very good hints/tips for "M" series.
Alan

Edited by plasticpig72 on Friday 10th February 14:54


Edited by plasticpig72 on Friday 10th February 17:14

Andrew Gray

4,969 posts

148 months

Friday 10th February 2017
quotequote all
plasticpig72 said:
Why do i want QR Hinges.
Why not rolleyes, i have them on my 3000S and find them very handy.
Very easy mod even for DIY.
On my 3000S i also have a 5 speed gearbox which is also very nice but requires a lot more work to fit.
If or when i need to replace bullet connectors in the Wiring Harness or remove the Rad in comfort or relaminate around the frame that supports the Bonnet.
Imho this is exactly right.
I got the info from "M FIX" on the web many thanks, which has imho lots of very good hints/tips for "M" series.
Alan
These Might help when sorting the wiring
For those in the US
http://www.britishwiring.com/5-Way-Waterproof-Conn...
For those in the UK
http://www.autosparks.co.uk/catalogsearch/result/?...

5 way C855
7 way C857
9 way C859

Andrew


phillpot

17,105 posts

182 months

Friday 10th February 2017
quotequote all
Andrew Gray said:
These Might help when sorting the wiring, for those in the UK
"Girlie" stuff, this is what you want wink



Andrew Gray

4,969 posts

148 months

Friday 10th February 2017
quotequote all
phillpot said:
"Girlie" stuff, this is what you want wink


I have on my 3000s however i used these on the Tuscan much neater Mike will change my ones on the 3000s one day when i am bored and need a play.
Andrew

plasticpig72

Original Poster:

1,647 posts

148 months

Tuesday 14th February 2017
quotequote all
The adapter parts have now been machined, 10 minutes on a friends lathe.
Just waiting for the "R" clips to arrive and new 1/2 UNF 20 tpi set screws to arrive.
I will cut the heads off the set screws then screw into adapters.
When the job's finished i will post photos.
Alan

hallsie

2,184 posts

219 months

Wednesday 22nd February 2017
quotequote all
Alan
if you have anther set made up Ill have them off of you as long as they arent over the top on money

Phil, where can I get one of them shiny connector plugs?

Stu

phillpot

17,105 posts

182 months

Thursday 23rd February 2017
quotequote all
hallsie said:
where can I get one of them shiny connector plugs?
The plugs should be easy enough to find at trailer or caravan specialists (or Ebay), the trailing socket may be a little more tricky to track down.

Black plastic on Ebay............ clicky

Andrew Gray

4,969 posts

148 months

Thursday 23rd February 2017
quotequote all
I know Mike thinks these are Girly but in fairness half the size and much neater Stu

Andrew

DavidY

4,458 posts

283 months

Thursday 23rd February 2017
quotequote all
Girly connectors are ok, as long as you check the current rating (for a single pin), even on 'standard' 60W headlamp bulbs you are drawing 10A on full beam (2 x 60 = 120/12 = 10) and on uprated bulbs you could be drawing a lot more, I know there are some out there running 130/90 headlamp bulbs, that's over 20A on main beam!!!

Just make sure the return (earth) wire is thick enough!!!

Andrew Gray

4,969 posts

148 months

Thursday 23rd February 2017
quotequote all
DavidY said:
Girly connectors are ok, as long as you check the current rating (for a single pin), even on 'standard' 60W headlamp bulbs you are drawing 10A on full beam (2 x 60 = 120/12 = 10) and on uprated bulbs you could be drawing a lot more, I know there are some out there running 130/90 headlamp bulbs, that's over 20A on main beam!!!

Just make sure the return (earth) wire is thick enough!!!
Rest assured David they are more than up to the Job and as you can see a neater job than the bulky trailer sockets i have on the 3000s
Here is the Tuscan one although i have not fitted quick release hinges as yet still makes sense if the bonnet needs to come off at some point.



Andrew