wiring looms for a rover tuscan wanted
Discussion
Probably the easiest place to start with for the engine loom would be a flying lead set from emerald and their generic relay bundle, as its all going to be bespoke
http://www.emeraldm3d.com/full-looms-and-other-cab...
http://www.emeraldm3d.com/full-looms-and-other-cab...
Graham said:
Probably the easiest place to start with for the engine loom would be a flying lead set from emerald and their generic relay bundle, as its all going to be bespoke
http://www.emeraldm3d.com/full-looms-and-other-cab...
This. I buy in the emerald generic loom for all my ecu installs. You need to tell them a bit of info, dizzy or wasted spark coils, hall effect or inductive trigger etc. m3d, k3 or k6 (some pin locations changed on the latest ecu version, the pin for wasted spark coil driver 4 for instance ..)http://www.emeraldm3d.com/full-looms-and-other-cab...
spitfire4v8 said:
This. I buy in the emerald generic loom for all my ecu installs. You need to tell them a bit of info, dizzy or wasted spark coils, hall effect or inductive trigger etc. m3d, k3 or k6 (some pin locations changed on the latest ecu version, the pin for wasted spark coil driver 4 for instance ..)
I got the Emerald loom for my Rv8 emerald ECU install in the Taz, was quite easy to fit with no problems.Gassing Station | General Motorsport | Top of Page | What's New | My Stuff