(77racing) E-mail racing77@hotmail.co.uk

Tuscan Challenge race car Group A+ Chevrolet LS3 fully sequential Quaife G69,full aero but could very easily be turned back to an " A" car to sell the aero bits on.all the fast bits fitted, no vodka & Tonic(Now Just come runner up in Castle Combe GT Class A Championship and now holds the Combe GT out right lap record for 2014/15 at 1:09.23. Many wins and pretty much a podium car every time it goes out.call for a spec to die for. Now seriously for sale £55,000 cost £70+K to build.


4 x 255-35-18, 3 lap scrubbed in ready to race Toyo R888

A set of four Good and true Dymags 9"x18" would need a paint

TVR Tuscan Challenge Flag. The original very large purple flag 6' x 4' advertising the challenge in the paddocks, it is a very rare bit of TVR racing history.

10 tyres and wheels for griff or chim racer or trackday car. Various rims mostly Light weight compomotive motorsport , a set of unknown. All straight and true but will need refurb paint to your scheme. Tyres are , Dunlop wets and Dunlop race Slix all usable but really just valued them for the rims so bonus they come with tyres. e-mail me for more info on what sets I do have left.


One brand new never fitted Dunlop Slick 250/640/18 257 compound £100

One Amptown Universal flight case German top quality 1200x600x750 high on castors, superb for storing all the bits like diffs gearbox suspension etc that aren't used at every race. or of course workshop security either way a very use full storage solution £200

AP Racing 23 spline clutch, Sintered metallic plate and pressure plate. Only a few races old hardly bedded in . CP 249 and CP239 fits Rover V8 £265 inc packing & delivery

F/N/S lower suspension arm £185
Ajp to T5 bell housing £325
Standard Chevrolet LS3 Rods and Pistons/Rings
2x Quick refueling dump churns with fittings need resealing i think £400 Pr will split, also have one churn stand on wheels
Front aluminium under belly splitter fits Tuscan (used same as seen fitted to white car 77)
3" straight through stainless muffler exhaust will fit tuscan RV8 or AJP etc
3 x Oz 18" split rim
Tuscan fibreglass dash console
1pr Exhaust primary's / manifolds suit AJP engine
Passenger side toneau fibreglass panel £140

1-08-2018 updated

_________________________________________________________________________________________________________


CARS FOR SALE FROM DAVID GERALD SPORTSCARS/CLASSIC WORLD RACING
pictures on www.dgsportscars.co.uk TEL 01527 521050


For sale
2017 TVR Challenge Championship winning car
Class C Chimaera 4.0ltr
Alcon 4 pot calipers
Alloy bells
Close ratio 5th (T5)
AVO dampers
Spare rims & wets
Serviced & ready for 2018
£15,000
Classic World Racing 01527 521050

_________________________________________________________________________________________________________













__________________________________________________





Graham
Tasmin race car parts

S1 boot lid ( outer only)
s1 350 bonnet ( outer only)
s1 280 front spoiler

280i,350s1, 250is2, 400 front end, bonnet and boot lid. light weight or road spec.

tasmin headlight pods
tasmin mirror pods

Front sections bumper, bonnet , front splitter and rear bumpers for wedge from 280i to 400 ( road or race)

Wedge Headlight pods

400se rear boot spoiler ( road or lw race)


Tuscan Headlight pods
Some Tuscan Body parts

Chimaera Fast back Hardtop
Chimaera 1 Piece front end

Chimaera mk1 and mk2 nose race spec and road spec
Chimaera mk1 and mk2 Bonnet
Chimaera Rear

Grifith Front
Griffith Bonnet
Griffith Rear panel

Cerbera Bonnet

Tuscan S6 front and rear
Tuscan s6 service bonnet
Tuscan s6 Full Bonnet
Tuscan s6 rear


Tvr S bonnets 1,2,3 v8s now s4

Lots more available please ask


All panels available in race spec or Road spec
[updated 25/9/16]



ctsdave Dave Stewart

Cone diff as per Tuscan racers - inner 'LSD' part only not full diff.

Contact me for details - comtruck@hotmail.co.uk or 07836 795918
updated 28/1/16