BikealarmBlair's V8 Powered E46 BMW
Discussion
Caractacus said:
Blair357ci said:
A mate of mine has a Z3M Coupe with an LS1 and its now lighter than the std car.
Loving your build, please keep us all updated Also, is there any info on the Breadvan, somewhere?Quick snapshot of it here http://www.dynotorque.co.uk/index.php/2011/07/andy... the owners not really a big forum type but I think he did a build thread somewhere
Blair357ci said:
Caractacus said:
Blair357ci said:
A mate of mine has a Z3M Coupe with an LS1 and its now lighter than the std car.
Loving your build, please keep us all updated Also, is there any info on the Breadvan, somewhere?Quick snapshot of it here http://www.dynotorque.co.uk/index.php/2011/07/andy... the owners not really a big forum type but I think he did a build thread somewhere
http://www.z3mcoupe.com/forum/showthread.php?t=866...
Blair357ci said:
Balls.....having just read that i'm now even more keen on dropping the LS into my Zed.dean350z said:
Balls.....having just read that i'm now even more keen on dropping the LS into my Zed.
Would this help..... http://www.dynotorque.co.uk/index.php/2011/07/spen...
http://www.zroadster.net/forum/viewtopic.php?t=172...
Sorry a bit new to forums got a 325 coupe and got offered a m3 rear end cheep so thought I would give it a go(subframe,diff,brakes,drive shafts,prop pretty much everthing!) everything went in easy got the prop shortened and balanced had no probs! .... Appart from the speedo jst wondered how I can get around it, I believe the m3 wheel speed sensors are magnoresstive and std e46 are hall sensors I have tried to fit my old sensors in m3 hubs but they do not get close enough to reluctor ring, are they going to work if I get them closer by modding the hub or am I pissing in the wind any help will be appreciated !
Benb87 said:
Sorry a bit new to forums got a 325 coupe and got offered a m3 rear end cheep so thought I would give it a go(subframe,diff,brakes,drive shafts,prop pretty much everthing!) everything went in easy got the prop shortened and balanced had no probs! .... Appart from the speedo jst wondered how I can get around it, I believe the m3 wheel speed sensors are magnoresstive and std e46 are hall sensors I have tried to fit my old sensors in m3 hubs but they do not get close enough to reluctor ring, are they going to work if I get them closer by modding the hub or am I pissing in the wind any help will be appreciated !
I took the 325 sensors and fitted them to the M3 hubs nothing else was required at all.Benb87 said:
Oh cool thanks m8 I rekan it doesn't fit as I have the old asc not dsc do you still own ur car?
Yes still got it Nope that's not why it doesn't work at all mine is an ASC 01 325 coupe and the rear end I used was from an 05 M3 convertible. Have you checked with INPA to see if the car is seeing the wheel pulses? Have you disconnected the ABS module? As (sorry if I'm teaching you to suck eggs) the speedo is driven from the left rear wheels abs sensor. Are you 100% sure you have sensors plugged in correctly and are using the correct ones (there are two types).
No haven't touched the module y is that? I got a new std sensor ordered by chassis number and fitted to n/s/r still nothing the connection is ok, I don't think it is long enough to sit close enough to reluctor as don't have wheel speed signal when using snap on scanner, the 2 different sensors is one the blue connector and the other grey?
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff