Renault Sport 172 Cup
Discussion
I bought this car standard last December and since then I've being playing around with it.
It made 181 bhp and 165 ftlb at Surrey Rolling Road. Not bad when you think it only weighs 1020kg
Renault Sport 172 Cup Spec:
Power: 181.2 bhp and 165 ftlb
Weight: 1020kg
Engine:
Ktec Decat
Full Ktec Stealth Exhaust
JMS Performance Remap with Over Run
K&N Panel Filter
Silicon Hose for Air Filter to Throttle Body
Oil Breather
Engine Cover Custom Spray
Ktec Solid Engine Mounts
Polyflex Dog Bone
Blue Hose Kit
Suspension:
Vmaxx Coilovers (running -1.5 degrees camber)
OMP Front & Rear Strut Braces
Brakes:
Brembo High Carbon Discs
Ferodo DS2500 Pads
Braided Brake Lines
Wheels/Tires:
Polarized Wheel Bolts
Polarized Locking Nuts
Michelin Pilot Sport 3's All Round
Exterior:
New Style RS Badges
It made 181 bhp and 165 ftlb at Surrey Rolling Road. Not bad when you think it only weighs 1020kg
Renault Sport 172 Cup Spec:
Power: 181.2 bhp and 165 ftlb
Weight: 1020kg
Engine:
Ktec Decat
Full Ktec Stealth Exhaust
JMS Performance Remap with Over Run
K&N Panel Filter
Silicon Hose for Air Filter to Throttle Body
Oil Breather
Engine Cover Custom Spray
Ktec Solid Engine Mounts
Polyflex Dog Bone
Blue Hose Kit
Suspension:
Vmaxx Coilovers (running -1.5 degrees camber)
OMP Front & Rear Strut Braces
Brakes:
Brembo High Carbon Discs
Ferodo DS2500 Pads
Braided Brake Lines
Wheels/Tires:
Polarized Wheel Bolts
Polarized Locking Nuts
Michelin Pilot Sport 3's All Round
Exterior:
New Style RS Badges
Edited by Chris1986 on Wednesday 25th April 19:45
sorry steven
and Frank, I first jet wash the car, then add a layer of snowfoam, followed by another jet wash then hand wash using Meguiars Ultimate Wash & Wax and rinsed off with jet wash again. then I clayed the car with Meguiars clay bar kit. Next sep was a machine cut using various grades of Menzerna cutting compound. I then sealed the paint with Carlack 68 - Long Life Sealant. Next step i changed the pad on the machine polisher and used Meguiars Deep Crystal Polish, then lastly I used Poorboys Nattys Paste Wax Blue, applied by hand (which I may add it was very hard to resist eating it and omg it smells so nice lol)
and Frank, I first jet wash the car, then add a layer of snowfoam, followed by another jet wash then hand wash using Meguiars Ultimate Wash & Wax and rinsed off with jet wash again. then I clayed the car with Meguiars clay bar kit. Next sep was a machine cut using various grades of Menzerna cutting compound. I then sealed the paint with Carlack 68 - Long Life Sealant. Next step i changed the pad on the machine polisher and used Meguiars Deep Crystal Polish, then lastly I used Poorboys Nattys Paste Wax Blue, applied by hand (which I may add it was very hard to resist eating it and omg it smells so nice lol)
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff