The Bomber... Just another Impreza?
Discussion
Krikkit said:
A bit of detail about your Cayman R would be interesting.
Life gets in the way sometimes, I'm sure spending hours in a lockup on a project car doesn't appeal right now, but give it another 10 years you might feel like it. Congrats too.
Im not prepared to wait 10 years to find out either lol.Life gets in the way sometimes, I'm sure spending hours in a lockup on a project car doesn't appeal right now, but give it another 10 years you might feel like it. Congrats too.
Cayman R -
2012MY C16 UK car
Manual
Carbon buckets
Spyder wheels
Sport Chrono
PCM3
Alcantara trim
Short shift
Enhanced with the following parts:
EVOMs intake
GT3 throttle body
IPD plenum
Fabspeed race headers with 200 cell sports cats
Remus titanium exhaust
MASE engineering map
Dyno prints for anything between 345-375bhp
Girodisc 2 piece floating discs all round
Pagid RS29s
GT3 brake ducts
GT3 master cylinder
Titanium shims
PF fluid
RSS Tarmac billet rose joint lower arms
Michelin Cup 2 tyres
Titanium wheel bolts
Geometry by Centre of Gravity
Edited by frayz on Sunday 28th July 11:35
All parts for sale but the shell will be sold first.
All info in the build thread:
https://www.scoobynet.com/755929-t26-wrc-re-imagin...
Serious enquires by PM only
Parts updated to reflect items gone,
I'm not exactly pushing these sales right now (in the middle of a kitchen refit and the garage is brimmed and not all parts can be easily accessed), so if theres something you see or you know from the car, send me a PM.
Engine
New EJ257 block (modified by FE)
New EJ257 crankshaft
ACL race series main bearings
ACL race series big end bearings
Lateral Crower "long" H section forged con-rods
Lateral Wiseco custom pistons
ARP head bolts
RCM modified oil pump
Cosworth sump baffle plate
XWORKSS baffled sump
Cylinder heads
JDM "Big Port" Spec C heads (modified by FE with custom combustion chambers and port work)
Supertech Stainless/Nitrided intake valves
Supertech Inconel exhaust valves
JDM Spec C cams
NGK Racing 8 spark plugs
JDM Spec C long runner intake manifold
10mm Phenolic spacers
Fuel System
Custom swirlpot
Bosch 413 Motorsport fuel pump in custom FE QR cradle
Fuelab billet filter
Custom FE Spec C billet fuel rails
Injector Dynamics 1000cc injectors
Fuelab FPR
PE Kevlar timing belt
CDF billet timing guide
New Genuine OEM waterpump, piston rings, gaskets/seals
Turbo System
GT-Spec Gen II, Zircotec ceramic coated tubular manifold
Custom T-Logic twisted inconel up-pipe
Custom XWORKSS twisted downpipe
Garrett GT3582R turbocharger with Tial .82 V-band housing
Tial 44mm External wastegate
Bespoke 3" lightweight race exhaust system from Simpson Race Exhausts. (Ceramic coated with bent down tailpipe)
Grimmspeed EBCS
3bar map sensor & bracket
Newage coil packs
Smooth throttle body with TPS
ISCV
Sensors
Header tank
Alternator coated silver
Alternator plastic cover
Radiator with cooling fans
Custom FE/XWORKSS breather system and RTS catch tank
Ixiz-Concept bonnet dampers
Odyssey PC680 race battery
Hand built custom engine wiring harness
Exedy Hyper Compe-R twin plate carbon clutch
Exedy Hyper Compe-R forged billet flywheel
Starter motor
Clutch master cylinder & Goodridge braided clutch line
Setrab 19 row oil cooler with custom FE housing
Transmission/Drivetrain
STI 6 Speed gearbox with delrin linkage bushes / R180 rear diff
AS Performance delrin gear linkage bush kit
Hardrace engine/gearbox mounts
STI gearbox cradle
STI front hubs
STI front driveshafts
STI front crossmember
STI rear hubs
STI rear shafts
STI rear cradle
STI Space saver wheel (clears brembos)
Samco hosing - coolant
Speedflow Fittings/hose - fuel
ECU
Syvecs S6 (Launch Control & AntiLag) with 8 individual cals adjustable on the fly
Braking system:
Master cylinder
AP Racing 6 pot CP7040 calipers, 356mm AP grooved discs,
Pagid RS29 front pads
BNIB AP Racing 4 pot rear calipers, 335mm AP grooved discs,
Pagid RS29 rear pads
Suspension Modifications:
Genuine WRC SACHS dampers
Whiteline adjustable front sway bar
Whiteline adjustable rear sway bar
Whiteline adjustable front drop links NEW
Whiteline camber bolts
Whiteline rear diff locking kit
Whiteline roll centre adjustment kit
SD Motorsport solid rear diff mount
CDF billet front ARB drop links
CDF billet rear ARB drop links
CDF billet pitch stop
CDF billet anti lift kit
Super Pro poly gearbox cradle bushes
Whiteline steering rack bushes
PAS pump with alloy pulley
STI8 Spec C steering rack
STI alloy arms & Super Pro poly lower arm bushes
Interior/Exterior Modifications:
Interior
Dash clock delete
Flocked Steering column cowlings
Flocked centre console
Standard centre console
Full set genuine prodrive edition door cards
STI gear surround black powdercoat with hardware
Satin black dash trims
Sparco Pro WRC carbon seats
WRC/Group N carbon rear firewall
WRC/Group N carbon 3 piece parcel shelf
Full carbon door cards
Genuine STi mats NLA
DSG white delrin gear knob NLA
Full Works Bell Rapfix 2 QR steering setup with lock
Momo Mod 07 steering wheel
Lifeline 4ltr plumbed in fire supression system
Lifeline 2.25ltr handheld fire extinguisher
Exterior:
BNIB Carbon STi wing blanks
BNIB Genuine Subaru badge
BNIB Genuine STI boot badge
Genuine Prodrive Edition front grille & end caps
Genuine Prodrive Edition drivers side headlight
Genuine Subaru Bugeye rear lamps pair
Genuine Prodrive WRC S7 Carbon mirrors
WRC plain black Kaylan mudflaps
Polished/painted Prodrive rear diff guard
Data:
CarTek wireless steering wheel controls
NEW JTI Toucan with NTK WB & associated sensors
Phormula KS3 knock analyzer
Bodyshell:
"T26 WRC
Full T45 custom rollcage with swanneck hans bars, WRC screen gussets and WRC cone pickups for diff cradle.
Full WRC tubs front/rear.
WRC front cross brace.
WRC front turrets.
20mm sill stand tubes."
Panels
Carbon S7/8 WRC front bumper
Carbon S7/8 WRC rear bumper
Carbon S&/8 WEC twintex skirts
Carbon S7/S8 bonnet
NEW Genuine Steel WRC S7/S8 Wings
NEW GRP S7/8 rear doors
NEW GRP WRC headlight housings
WRC Prodrive S7/8 Carbon undertray Tarmac
WRC Prodrive S7/8 Carbon undertray Gravel
All info in the build thread:
https://www.scoobynet.com/755929-t26-wrc-re-imagin...
Serious enquires by PM only
Parts updated to reflect items gone,
I'm not exactly pushing these sales right now (in the middle of a kitchen refit and the garage is brimmed and not all parts can be easily accessed), so if theres something you see or you know from the car, send me a PM.
Engine
New EJ257 block (modified by FE)
New EJ257 crankshaft
ACL race series main bearings
ACL race series big end bearings
Lateral Crower "long" H section forged con-rods
Lateral Wiseco custom pistons
ARP head bolts
RCM modified oil pump
Cosworth sump baffle plate
XWORKSS baffled sump
Cylinder heads
JDM "Big Port" Spec C heads (modified by FE with custom combustion chambers and port work)
Supertech Stainless/Nitrided intake valves
Supertech Inconel exhaust valves
JDM Spec C cams
NGK Racing 8 spark plugs
JDM Spec C long runner intake manifold
10mm Phenolic spacers
Fuel System
Custom swirlpot
Bosch 413 Motorsport fuel pump in custom FE QR cradle
Fuelab billet filter
Custom FE Spec C billet fuel rails
Injector Dynamics 1000cc injectors
Fuelab FPR
PE Kevlar timing belt
CDF billet timing guide
New Genuine OEM waterpump, piston rings, gaskets/seals
Turbo System
GT-Spec Gen II, Zircotec ceramic coated tubular manifold
Custom T-Logic twisted inconel up-pipe
Custom XWORKSS twisted downpipe
Garrett GT3582R turbocharger with Tial .82 V-band housing
Tial 44mm External wastegate
Bespoke 3" lightweight race exhaust system from Simpson Race Exhausts. (Ceramic coated with bent down tailpipe)
Grimmspeed EBCS
3bar map sensor & bracket
Newage coil packs
Smooth throttle body with TPS
ISCV
Sensors
Header tank
Alternator coated silver
Alternator plastic cover
Radiator with cooling fans
Custom FE/XWORKSS breather system and RTS catch tank
Ixiz-Concept bonnet dampers
Odyssey PC680 race battery
Hand built custom engine wiring harness
Exedy Hyper Compe-R twin plate carbon clutch
Exedy Hyper Compe-R forged billet flywheel
Starter motor
Clutch master cylinder & Goodridge braided clutch line
Setrab 19 row oil cooler with custom FE housing
Transmission/Drivetrain
STI 6 Speed gearbox with delrin linkage bushes / R180 rear diff
AS Performance delrin gear linkage bush kit
Hardrace engine/gearbox mounts
STI gearbox cradle
STI front hubs
STI front driveshafts
STI front crossmember
STI rear hubs
STI rear shafts
STI rear cradle
STI Space saver wheel (clears brembos)
Samco hosing - coolant
Speedflow Fittings/hose - fuel
ECU
Syvecs S6 (Launch Control & AntiLag) with 8 individual cals adjustable on the fly
Braking system:
Master cylinder
AP Racing 6 pot CP7040 calipers, 356mm AP grooved discs,
Pagid RS29 front pads
BNIB AP Racing 4 pot rear calipers, 335mm AP grooved discs,
Pagid RS29 rear pads
Suspension Modifications:
Genuine WRC SACHS dampers
Whiteline adjustable front sway bar
Whiteline adjustable rear sway bar
Whiteline adjustable front drop links NEW
Whiteline camber bolts
Whiteline rear diff locking kit
Whiteline roll centre adjustment kit
SD Motorsport solid rear diff mount
CDF billet front ARB drop links
CDF billet rear ARB drop links
CDF billet pitch stop
CDF billet anti lift kit
Super Pro poly gearbox cradle bushes
Whiteline steering rack bushes
PAS pump with alloy pulley
STI8 Spec C steering rack
STI alloy arms & Super Pro poly lower arm bushes
Interior/Exterior Modifications:
Interior
Dash clock delete
Flocked Steering column cowlings
Flocked centre console
Standard centre console
Full set genuine prodrive edition door cards
STI gear surround black powdercoat with hardware
Satin black dash trims
Sparco Pro WRC carbon seats
WRC/Group N carbon rear firewall
WRC/Group N carbon 3 piece parcel shelf
Full carbon door cards
Genuine STi mats NLA
DSG white delrin gear knob NLA
Full Works Bell Rapfix 2 QR steering setup with lock
Momo Mod 07 steering wheel
Lifeline 4ltr plumbed in fire supression system
Lifeline 2.25ltr handheld fire extinguisher
Exterior:
BNIB Carbon STi wing blanks
BNIB Genuine Subaru badge
BNIB Genuine STI boot badge
Genuine Prodrive Edition front grille & end caps
Genuine Prodrive Edition drivers side headlight
Genuine Subaru Bugeye rear lamps pair
Genuine Prodrive WRC S7 Carbon mirrors
WRC plain black Kaylan mudflaps
Polished/painted Prodrive rear diff guard
Data:
CarTek wireless steering wheel controls
NEW JTI Toucan with NTK WB & associated sensors
Phormula KS3 knock analyzer
Bodyshell:
"T26 WRC
Full T45 custom rollcage with swanneck hans bars, WRC screen gussets and WRC cone pickups for diff cradle.
Full WRC tubs front/rear.
WRC front cross brace.
WRC front turrets.
20mm sill stand tubes."
Panels
Carbon S7/8 WRC front bumper
Carbon S7/8 WRC rear bumper
Carbon S&/8 WEC twintex skirts
Carbon S7/S8 bonnet
NEW Genuine Steel WRC S7/S8 Wings
NEW GRP S7/8 rear doors
NEW GRP WRC headlight housings
WRC Prodrive S7/8 Carbon undertray Tarmac
WRC Prodrive S7/8 Carbon undertray Gravel
Mij91 said:
I've had this bookmarked for years and it still brings sadness to see it parted out! An awesome machine and I hope this bump allows for any newcomers to be able to enjoy what I believe to be one of the best build threads to have graced Readers' cars.
You should see what Frayz did to his Clio!Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff