Scratch built car
Discussion
dom9 said:
The speed you're knocking this out is just awesome - very impressive!
Looking forward to seeing this run for the first time... Next wednesday at this rate!
Please see earlier post “I have been working on the project for the last few years and intend to update the build thread regularly” CheersLooking forward to seeing this run for the first time... Next wednesday at this rate!
The crossbeam and lower links maintain the correct toe angle of one wheel relative to the other, however due to the relative angles of the trailing radius arms, body roll results in the entire cross-beam and lower links pivoting slightly about the crossbeam's mounting points, thus inducing a small amount of passive rear wheel steering, which may result in significantly improved handling. When the Jaguar components are re-used in other vehicles, the differential is often rigidly mounted to the chassis, different radius arm configurations are used, and the passive rear wheel steering effect is lost.
[/quote]
To many parameters involved to say how the loss of passive rear wheel steering will affect the handling.
[/quote]
To many parameters involved to say how the loss of passive rear wheel steering will affect the handling.
gifdy said:
It's threads like this that make me keep coming back to PH (after reading some of the trash in other less 'car' oriented parts of the Forum ) . Fantastic stuff - just don't leave it too long between updates as we will need a regular fix
Am I right in thinking this project has been running for a while and the posts are not in realtime ? If not, amazing speed.
Also agree you should be getting in touch with Les Edgar
Thanks and yes it’s been running for a few years and I intend to update regular. Am I right in thinking this project has been running for a while and the posts are not in realtime ? If not, amazing speed.
Also agree you should be getting in touch with Les Edgar
LordFlathead said:
Just love this build. So we have by comparison;
Cracking project! I think it's going to have a touch of Lola T70 looks somewhere down the line
Bookmarked
Thanks, the chassis should have good torsional rigidity and this will increase when the chassis side panels are fully welded in.- 1250kg ish - about the same as an Ultima GTR
- Square box section of a larger diameter
- Lots of triangulation!
Cracking project! I think it's going to have a touch of Lola T70 looks somewhere down the line
Bookmarked
Papa Hotel said:
I bookmarked this thread when it was made, fully expecting to never see it again, yet another legendary PH thread where the sum of fk-all happens, the OP disappears, sitting hunched over his PC, his shoulders bobbing up and down as he giggles at the stir he's caused.
I clicked on this thread again, surprised it had gone to seven pages, I thought I'd see seven pages of derision aimed at no-one.
I was wrong, this is the coolest thing I have ever seen in my life, I can't wait to see how it all turns out.
ThanksI clicked on this thread again, surprised it had gone to seven pages, I thought I'd see seven pages of derision aimed at no-one.
I was wrong, this is the coolest thing I have ever seen in my life, I can't wait to see how it all turns out.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff