clarkson's e46 m3 and previous cars - lots of pics
Discussion
- **ing seaguls
quick buff
re dying the seat
they are matt finish , they look a billion times better should of got some before pics , they look at bit shiny in the pics but THEY have dried completley matt im happy as
realign front bumper
looks ten times better
going to order some more carbon cloth and scuffmaster to finish rest of interior off
Great work you've done on this one, really impressive. Nice to see you can enjoy it as well as get it back to a very good condition. One thing I wanted to ask- can you say some more about this:
clarkson22 said:
I'm guessing it's about 8mm od piping? Do you make a hole to push it up there or is there a space? And did you insert pipe all the way to the top? Thanks for any info, I could do with this trick on my Alpina!gave the car a good clean today , also ordered a decat , i want more noise and rasp on standard system and ill be the judge if it louder or not lol, lots of conflicting reveiws :muttley: also going to gut my back box properly and remove everything ,going to order martyn's binary software off him when my cable comes so i can delete the sensors and have a play around anyway some clean pics
hopefully everything comes tomorrow
hopefully everything comes tomorrow
cheers guys my decat came today and my cable for laptop to car, going to get up super early get exhaust off and stick decat on and cut the rest of my bck box open and remove whats left , got some software off a fellow on m3cutters that allows you to delete o2 sensors , shift lights, raise rpm and lots of others hes just added the alpha n map to it so its a good bit of software for only 20 quid so will be playing about tomorow
cheers dude vids posted at bottom of page second ones after its warmed up a little
well fitted the decat today and totally gutted the back box.....wow lol
decat was perfect fit completly , only had to run a 8 mm drill through the front lamnda senser and it went in fine, now the noise..fk its drony i wont lie but thats the gutted back box but i dont care is so much fun putting you foot down , the rasp is super loud after the decat its there just after 2k like when cold but o much more louder ..as for performance, just revs a little quicker not noticed it any quicker but there isnt any flat spots either so win win , deleted codes with martyn software added pops and bangs shift light , oil temp warm up ,sap delete on cold start , all in all im super happy
some vids of cold start below
vids
thanks for looking
well fitted the decat today and totally gutted the back box.....wow lol
decat was perfect fit completly , only had to run a 8 mm drill through the front lamnda senser and it went in fine, now the noise..fk its drony i wont lie but thats the gutted back box but i dont care is so much fun putting you foot down , the rasp is super loud after the decat its there just after 2k like when cold but o much more louder ..as for performance, just revs a little quicker not noticed it any quicker but there isnt any flat spots either so win win , deleted codes with martyn software added pops and bangs shift light , oil temp warm up ,sap delete on cold start , all in all im super happy
some vids of cold start below
vids
thanks for looking
lol well it is too loud hahaha , on full chat its awesome pops and bangs on overun from 5k is ...awesome but the drone at low revs is stupid , im going to get another back box and modify that a little this time, a fully gutted backbox is a no no for the drone , but the rasp from the decat early on is crazy its sounds mental on full chat, ill get a couple of videos before i change my backbox , anyway can you tell what it is haa...
a trim, and couple more coats of resin looks better
few more coats
a trim, and couple more coats of resin looks better
few more coats
paint was flaking so i did the top half, but im going to do the full piece next time and redo this one as i think it will look better
heres the only problem bit
it needs flatting but it the edge where it meets the bottom plastic , im going to have a go doing the full piece on drivers side it should look alot better so im going to scrap this piece i think
did the ashtray cover
none of the parts have been flatted or polished yet im just gonna do them all toghether.
heres the only problem bit
it needs flatting but it the edge where it meets the bottom plastic , im going to have a go doing the full piece on drivers side it should look alot better so im going to scrap this piece i think
did the ashtray cover
none of the parts have been flatted or polished yet im just gonna do them all toghether.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff