My Monaro 6.0VXR S/C

Author
Discussion

TorqueR

1,767 posts

131 months

Tuesday 24th September 2013
quotequote all
007 VXR said:
Nice Vauxhall buddy.



















How much power does the Corsa make? Any future plans for it?

007 VXR

Original Poster:

64,187 posts

186 months

Tuesday 24th September 2013
quotequote all
TorqueR said:
007 VXR said:
Nice Vauxhall buddy.



















How much power does the Corsa make? Any future plans for it?
Thanks smile

The Corsa is a mates runaround, so no plans for it,
but he has a porker turbo and a 1000bhp Monaro to play with.

wormus

14,466 posts

202 months

Tuesday 24th September 2013
quotequote all
has Roger's Charger broken down?

007 VXR

Original Poster:

64,187 posts

186 months

Tuesday 24th September 2013
quotequote all
wormus said:
has Roger's Charger broken down?
No, to much water in the rad hehe

007 VXR

Original Poster:

64,187 posts

186 months

Saturday 9th November 2013
quotequote all
MOT all ok, Just starting to plan next years mods.

Water/meth injection
Bigger charge cooler
flat floor at last i hope.

Codswallop

5,250 posts

193 months

Saturday 9th November 2013
quotequote all
I cannot believe you're still finding things to improve hehe

What's the flat floor about?

007 VXR

Original Poster:

64,187 posts

186 months

Saturday 9th November 2013
quotequote all
Codswallop said:
I cannot believe you're still finding things to improve hehe

What's the flat floor about?
always something to do laugh

going to make the underside of the car flat

Codswallop

5,250 posts

193 months

Saturday 9th November 2013
quotequote all
Ah, flat underside for the aero. Gottcha smile

007 VXR

Original Poster:

64,187 posts

186 months

Saturday 9th November 2013
quotequote all
Codswallop said:
Ah, flat underside for the aero. Gottcha smile
yes
Cant add anymore power now (standard pistons)
saying that Tattooboy again 20rwhp with water meth injection at SRR
so should take mine to 550rw (700fly) smile

007 VXR

Original Poster:

64,187 posts

186 months

Sunday 8th December 2013
quotequote all
popped out for lunch today and got spotted smile



chuntington101

5,733 posts

235 months

Monday 9th December 2013
quotequote all
007 VXR said:
MOT all ok, Just starting to plan next years mods.

Water/meth injection
Bigger charge cooler
flat floor at last i hope.
Can i ask how you plan on making the chargecooler (CC) larger? i thought the M112/122 units where integrated into the lower intake manifold. Are you going to be using a spacer to lift the supercharger and run a custom thicker CC? Or are you making the heat exchange (low temp rad that sits at the front of the car in the cold air-stream) larger?

007 VXR

Original Poster:

64,187 posts

186 months

Monday 9th December 2013
quotequote all
chuntington101 said:
007 VXR said:
MOT all ok, Just starting to plan next years mods.

Water/meth injection
Bigger charge cooler
flat floor at last i hope.
Can i ask how you plan on making the chargecooler (CC) larger? i thought the M112/122 units where integrated into the lower intake manifold. Are you going to be using a spacer to lift the supercharger and run a custom thicker CC? Or are you making the heat exchange (low temp rad that sits at the front of the car in the cold air-stream) larger?
Sorry, you right (heat exchanger) for the TVS2300 paperbag

chuntington101

5,733 posts

235 months

Monday 9th December 2013
quotequote all
007 VXR said:
chuntington101 said:
007 VXR said:
MOT all ok, Just starting to plan next years mods.

Water/meth injection
Bigger charge cooler
flat floor at last i hope.
Can i ask how you plan on making the chargecooler (CC) larger? i thought the M112/122 units where integrated into the lower intake manifold. Are you going to be using a spacer to lift the supercharger and run a custom thicker CC? Or are you making the heat exchange (low temp rad that sits at the front of the car in the cold air-stream) larger?
Sorry, you right (heat exchanger) for the TVS2300 paperbag
awww mate you had me hoping for an amazing bit of work there! lol

What are your plans for the HE? Big single unit? adding a couple of smaller units? Rear mounted?.....

Chris.

007 VXR

Original Poster:

64,187 posts

186 months

Monday 9th December 2013
quotequote all
chuntington101 said:
007 VXR said:
chuntington101 said:
007 VXR said:
MOT all ok, Just starting to plan next years mods.

Water/meth injection
Bigger charge cooler
flat floor at last i hope.
Can i ask how you plan on making the chargecooler (CC) larger? i thought the M112/122 units where integrated into the lower intake manifold. Are you going to be using a spacer to lift the supercharger and run a custom thicker CC? Or are you making the heat exchange (low temp rad that sits at the front of the car in the cold air-stream) larger?
Sorry, you right (heat exchanger) for the TVS2300 paperbag
awww mate you had me hoping for an amazing bit of work there! lol

What are your plans for the HE? Big single unit? adding a couple of smaller units? Rear mounted?.....

Chris.
Sorry to dash your hopes hehe

Bigger front mounted (fingers crossed) Not that iam having issues, but better safe than sorry smile

007 VXR

Original Poster:

64,187 posts

186 months

Monday 9th December 2013
quotequote all



After_Shock

8,751 posts

219 months

Tuesday 10th December 2013
quotequote all
007 VXR said:
Bigger front mounted (fingers crossed) Not that iam having issues, but better safe than sorry smile
Always a good idea, they seem a popular upgrade for the likes of the ZL1 Camaro, bigger rad more cooling capability and the more water you have in the system the more heat it can extract.

Captainawesome

1,817 posts

162 months

Tuesday 10th December 2013
quotequote all
Ansolutely love this car. Very, very nicely done.

007 VXR

Original Poster:

64,187 posts

186 months

Tuesday 10th December 2013
quotequote all
Captainawesome said:
Ansolutely love this car. Very, very nicely done.
Thank you smile

007 VXR

Original Poster:

64,187 posts

186 months

Tuesday 10th December 2013
quotequote all
After_Shock said:
007 VXR said:
Bigger front mounted (fingers crossed) Not that iam having issues, but better safe than sorry smile
Always a good idea, they seem a popular upgrade for the likes of the ZL1 Camaro, bigger rad more cooling capability and the more water you have in the system the more heat it can extract.
Hoping to have Neil work on it early next year biggrin

After_Shock

8,751 posts

219 months

Wednesday 11th December 2013
quotequote all
007 VXR said:
Hoping to have Neil work on it early next year biggrin
Could be worth looking into the ZL1 upgrade, it uses a similar SC so the piping would in theory be similar, mounting brackets be different though.