Slippery slope

Author
Discussion

mollytherocker

14,366 posts

209 months

Monday 12th May 2014
quotequote all
WCZ said:
how much weight do you think it's saved?
About a stone, as that will be what he sweated out!

zeb

3,201 posts

218 months

Monday 12th May 2014
quotequote all
If curiosity got the better of you.....what exactly were you curious about ??!! hehe

jackal

Original Poster:

11,248 posts

282 months

Monday 12th May 2014
quotequote all
mollytherocker said:
WCZ said:
how much weight do you think it's saved?
About a stone, as that will be what he sweated out!
claplaugh

jackal

Original Poster:

11,248 posts

282 months

Thursday 15th May 2014
quotequote all


Today I completed another 2.5 hours. I suppose it feels like its dragging now. A part of me thinks i'm close to home but truth be told there is still a fair bit to do. When you're expeting to make fast headway you never do.



First job was to get the drivers seat out. Ran into a major stumbling block here as one of the cap heads was on so tight and it ended up getting nice and chewed and rounded. Took me 20 minutes or so but I had to hammer all sorts of stuff in there to force it round. Also had to remove all the other seat screws and rotate the whole seat around a little to help the thing budge.




Today I refrained from getting into the mask and equipping the Xylene, just was not in the mood to get into all that and besides I am running low on the solvent and need to order some more.

I did what I could with the ball rolling technique, starting with the offside sill. I then did some ball rolling on the vertical panel of the offisde rear seat which did lift quite a bit of the thick glue.








Also removed the carpet and sound deadening around the tranmission tunnel and in the front footwells.





So not too long to go now. Just need a really good session on those rear footwells and then attack the tranmission tunnel and we're done.

Incidentally, I've been told to not bother with the loom as that will be unwrapped and re-wrapped in any case as the plan is to strip it back to an RS loom. There are a lot of things that won't need power anymore .... rear speakers, rear wiper assembly, rear spoiler, rear bootlid light, sunroof, central locking, electric windows, rear window heater element etc.

mollytherocker

14,366 posts

209 months

Thursday 15th May 2014
quotequote all
Strip it back to an RS loom?

Jesus mate, I fear for your sanity!

jackal

Original Poster:

11,248 posts

282 months

Friday 16th May 2014
quotequote all
lots of redundant weight in that loom !!!

Orangecurry

7,426 posts

206 months

Friday 16th May 2014
quotequote all
I shudder to think what he'll be wearing when he drives it.....


eek

jackal

Original Poster:

11,248 posts

282 months

Friday 16th May 2014
quotequote all
If you could hold the rear seats, all that carpet and sound deadening in your hands all at the same time .... like lifting a hippopotamus.

And those hardbacks .... stupid heavy. You should have to pay folk 4k to have them take them off your hands, not the other way round !

Remember, when you fit the RS speedlines and RS brakes, you add 500kg which you then need to remove. laugh

Orangecurry

7,426 posts

206 months

Friday 16th May 2014
quotequote all
....I said about the weight of the Speedlines at the time you sourced them biggrin

Get some 'wrong' wheels and make it even lighter - do you still have a set of cup2s? Otherwise it's MY02s all the way, without centre caps.


Orangecurry

7,426 posts

206 months

Friday 16th May 2014
quotequote all
jackal said:
Remember, when you fit the RS speedlines and RS brakes, you add 500kg which you then need to remove. laugh
Isn't rotating weight = 4x weight on the car?

Get slimming, tubsy.

jackal

Original Poster:

11,248 posts

282 months

Friday 16th May 2014
quotequote all
Orangecurry said:
....I said about the weight of the Speedlines at the time you sourced them biggrin

Get some 'wrong' wheels and make it even lighter - do you still have a set of cup2s? Otherwise it's MY02s all the way, without centre caps.

is that some sort of porsche boxster ? laugh

Orangecurry

7,426 posts

206 months

Friday 16th May 2014
quotequote all
shhhhhhhhh it's from Rennlist - you don't want to hurt their feelings.

You're just jealous 'cos it weighs less than yours.

jackal

Original Poster:

11,248 posts

282 months

Friday 16th May 2014
quotequote all
A good 3 hours today.

Tackled the hateful offside rear footwell, probably the worst section of the lot; a thick river of glue down in the corners and crevices. Still it was a lovely sunny day and I just took my time in a pair of shorts with the sunshine beating down .... glue ball, rag, xylene, rag, scraper, rag, fingernail, xylene, glue ball etc etc..

After that I pulled the small carpet pieces out from around the pedal box and took the remaining glue off there. That was uncomfrtable to say the least, lying flat on my tummy across the whole floorpan. Did the rear piece of transmission tunnel after that then did 80% of the nearside rear footwell too.

After that I gave her a real good wipe all over. Loosened up some of the stray dirt on the floors and inbetween all the modules and electrical boxes under the seats and then vacuumed everywhere.

A good afternoons work. Just have to finish the nearside rear footwell which will be a doddle, and then complete the forward sides of the transmission tunnel and then the only task left will be to go back over everything with a careful 'final finish' in preparation for handover.

Hurrah ! Almot done ... :cheers:















jackal

Original Poster:

11,248 posts

282 months

Monday 19th May 2014
quotequote all
few other little jobs going on in the background


like cleaning the belts after 19 years:







g7jhp

6,964 posts

238 months

Monday 19th May 2014
quotequote all
Orangecurry said:
I shudder to think what he'll be wearing when he drives it.....

eek
Matching lightweight 'speed yellow' mankini? biggrin


aceparts

3,724 posts

241 months

Monday 19th May 2014
quotequote all
Jackal, I completely understand your obsession! Carry on!

SunDiver

780 posts

237 months

Monday 19th May 2014
quotequote all
I know you've done it now, and done it very well by the looks of things, but do you reckon a steamer would have helped the process of shifting that glue?

jackal

Original Poster:

11,248 posts

282 months

Tuesday 20th May 2014
quotequote all
ha ha .. like the Mankini !



@SD, really not certain. Some folk cite a steamer as a good tool in the early stages of pulling the carpet/sound deadening off but I honestly can't imagine it would do that much good with the thick glue patches. It will definitely soften it all up but you still have to use a ton of elbow grease and a solvent of some sort to actually get it off.

Remember that not all glue/cars are created equal and some cars have the harder browner glue which is a synch to get off apparently. As far as the glue i had goes, I refuse to believe that there is any simple wipe on/wipe off process to remove it. Actually corret that, there is a simple way and that's with dry ice but that's an expensive route I didn't fancy going down. (https://www.youtube.com/watch?v=QqHwq6Fkr3U)

griffter

3,983 posts

255 months

Tuesday 20th May 2014
quotequote all
Good result on the belts. How did you clean them?

jackal

Original Poster:

11,248 posts

282 months

Tuesday 20th May 2014
quotequote all
hi griff, just soaked them in good old Daz for several days and a bit of light scrubbing here and there.