Options for Tuscan ECU replacement

[spitfire4v8]

There's a couple of later single plug sp6 ecus on ebay for just over 500 each at the moment ..

[OakenOne]

Just spoke to bell hill garage they have a second hand ECU with matching chip set number in stock for £250 + vat so ihave gone for that... not as exciting as new modern ECU but nice and cheap.

[OakenOne]

GazzaM100 said:

Sent you an email

thanks emailed back

[Speed 3]

m4tti said:

Speed 3 said:

What do these newer generation ECU's bring in % terms to a boggo 4.0 with the minimum of sensor/loom mods in terms of betterment of standard Power, Torque, MPG, Emmissions (talking all-round usable, not balls-out mapping giving it all at the top end) ?

This explains it all quite well and will be largely applicable to the MBE..

http://www.syvecs.co.uk/forum/viewtopic.php?f=4&am...

Power went from 349bhp to 376bhp..

Do the additional sensors require engine out ?

[m4tti]

Speed 3 said:

Do the additional sensors require engine out ?

Nope. Fairly straightforward. I machined inlets into my throttle bodies, created a vacuum manifold, and threaded the cam cover for the cam position sensor. All can be done with the engine in place.

[DCerebrate]

Has anyone had CANEMS installed? And if so, what were the costs, and results?

[ratboiler]

I have an Omex 710 fitted to mine which I believe was/is a racing green product, I have to say the car runs perfectly even when taken into the mountains of Austria, the only down side is it does not pop and bang.

[Andy_mr2sc]

ratboiler said:

I have an Omex 710 fitted to mine which I believe was/is a racing green product, I have to say the car runs perfectly even when taken into the mountains of Austria, the only down side is it does not pop and bang.

Did you have this installed or was it already on the car? I guess the pops/bangs could be mapped in to it?

[Tonymg]

so how much please to fix and set up on my 2002 Tuscan please?

[Richie C]

Andy_mr2sc said:

ratboiler said:

I have an Omex 710 fitted to mine which I believe was/is a racing green product, I have to say the car runs perfectly even when taken into the mountains of Austria, the only down side is it does not pop and bang.

Did you have this installed or was it already on the car? I guess the pops/bangs could be mapped in to it?

I have an Omex on mine and rest assured it pops and bangs on demand. I can only assume it was mapped in by the previous owner.

[coco79]

DCerebrate said:

Has anyone had CANEMS installed? And if so, what were the costs, and results?

Try Lloyds Specialist Developments, they have done CANEMS installations for SP6 engines..

[m4tti]

Richie C said:

I have an Omex on mine and rest assured it pops and bangs on demand. I can only assume it was mapped in by the previous owner.

The pops and bangs don't necessarily have to be mapped, there's other factors like cam overlap. Running syvecs when my car is warm I still get pops and bangs, and that is running sequential injection.

[ratboiler]

Interesting.
Mine was fitted almost from new by the previous owner, it runs lovely but quietly for a TVR.