Exhaust

[Tuscan Wil]

Does anyone know how and what can be changed to make the Tuscan sound deeper (similar to the V8 noise)? I don't need any louder but would like to make the noise deeper.

[mk1fan]

Fit a V8.

[m4tti]

Wider diameter pipe work at the can end should give a high quality farting noise, and a cross pipe between the two rear boxes should smooth the pulses out.

[Curdster]

I had these made,. The increased diameter gives the V8 noise and the lack of any internal pipe work gives the pops and bangs, you lose the rasp but gain the boom. If I was to do it again I would narrow the diameter in an attempt to get the best of both worlds. The current diameter is the same as the carbon can outer.

[The Surveyor]

Get the latteral silencers which sit in front of the rear cans removed. That'll give a much deeper sound but it won't ever sound like a V8...

[Tuscan Wil]

Curdster said:

I had these made,. The increased diameter gives the V8 noise and the lack of any internal pipe work gives the pops and bangs, you lose the rasp but gain the boom. If I was to do it again I would narrow the diameter in an attempt to get the best of both worlds. The current diameter is the same as the carbon can outer.

Where did you get this made? PM me if necessary. Thanks!

[matt-man]

I've recently been through a bit of an exhaust changing process and I've gone back to square one! The car came with carbon company cans (straight through sleeved units) and I decided to get rid of the boxes before them (the empty resonator ones) and a word of warning....it makes it SO unbelievably loud! I drove the car home...and immediately booked it back in to be put back! IMHO it's just too loud...too raspy...just too much.

[Curdster]

Tuscan Wil. I had them made by the same guys who make The Cherry Bomb. I know others have tried to make contact to ask for the same or similar to be made up for them but with no luck. I have a spare set but they will need some mods as the diameter of the inlet is too large and one has been over clamped. If you can open the end of one and sleeve the other then offers welcome. If you are interested I can take some picks and email them to you if you PM me your email address.

[nevm3]

why would you want a straight six to sound like a V8?

[Milky400]

I love the sound of the Speed Six.... The V8 rumble is something I miss poodling around town, but the Speed Six on full strong is simply heavenly

[m4tti]

The warbling sound of a push rod v8 is dreadful and old. Reminds me of old American trucks. Give me a straight six, flat crank v8 or v10 any day