Removed all bolts and nuts and no clearance to get the mount out. Do you have to remove the engine bracket as well. Must be a trick somewhere as the top bolt is near impossible ...help!!!!!!
When I put my engine back I seem to recall it being easiest to do the exhaust side and then the drivers side. Have you removed the bolts sides so you can pull the engine over.
When i removed the exhaust side mount it literally ripped out of the rubber by hand, fatigued from the heat.
When i did mine, I unbolted (removed nuts) the rubber mounting and also removed the three bolts holding the bracket to the block. If your bolts come out as easy as mine, changing the mounting was really easy!